Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Midwood
If you burn wood in a Midwood fireplace, an annual chimney inspection is how you find out whether the vent is actually working before the heating season starts. We inspect masonry chimneys across Midwood, from the pre-war attached brick rows near Ocean Parkway to the walk-up apartment buildings off Coney Island Avenue, and we come knowing that many of these stacks are shared between neighbors. That single fact changes how an inspection should be done here. Our technicians have up to 12 years of experience, and every inspection includes camera work and a photo report you keep. Call (855) 924-3713 to book; we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Midwood Homeowners Call Chimney Sweep Bensonhurst for Chimney Inspection
Midwood is dense, old, and heavily used. The housing stock is overwhelmingly 1920s to 1950s semi-detached and fully attached brick, plus low-rise walk-ups and a strip of larger post-war homes. Many of those chimneys still carry the original clay tile flue serving a wood-burning fireplace, and plenty have a boiler venting through the same stack. People here heat with wood more than in much of Brooklyn, so the flues see real load, not decorative use.
That changes what an inspection has to cover. When two homes share a party-wall stack, a cracked liner on one side is a path for smoke and carbon monoxide into the adjoining house. We check the neighbor’s side of the stack as a standard part of a thorough Level 2 inspection, and we photograph the mortar joints where the two roofs meet so you can see the condition for yourself.
Our chimney inspection team works across Midwood and the surrounding blocks, and we book jobs by sweep rather than promising a clock. We work with the professional-grade brands certified specialists use, including Copperfield, DuraFlex, HeatShield, and Gelco, which matters when an inspection turns up something that needs relining or resurfacing rather than just a cleaning.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Midwood
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts of the chimney and venting system: the firebox, damper, smoke chamber, visible flue, and the exterior stack from the roof. For a Midwood homeowner who burns regularly and hasn’t changed anything about the fireplace or appliance, this is the standard annual check. We do it alongside the sweep so you get the cleaning and the assessment in one visit.
Level 2 Inspection
A Level 2 inspection adds a camera run of the flue and a closer look at accessible attic, crawlspace, and roof-level connections. In Midwood’s attached brick rows, this is where the shared party-wall stack gets proper attention, because a liner breach on your side can affect the house next door just as easily as yours. We recommend a Level 2 after any change in appliance, after a chimney fire, or when you’re buying or selling a home.
Level 3 Inspection
A Level 3 inspection is for a specific known or suspected problem that can’t be evaluated without opening something up, such as removing a section of chimney breast or dismantling part of the stack. It’s less common, but on older Midwood masonry it comes up when a camera finds damage that a visual check can’t explain. We tell you plainly when a Level 3 is warranted and when the evidence doesn’t justify it.
Camera Inspection
Camera inspection is the part that answers the real question: is the inside of this flue sound? Coastal Brooklyn’s damp winters and humid summers push moisture into unlined or uncapped brick, so freeze-thaw spalling of the crown and deterioration of the interior flue are the dominant failures here. We run the camera, show you the footage, and photograph what we find so you’re not taking anyone’s word for it.
Flue Inspection and Real Estate Inspection
A focused flue inspection checks one thing carefully: the liner, the joints, the smoke chamber, and whether the flue is sized and clear for what it serves. For a Midwood real estate transaction, a documented inspection gives a buyer or seller something concrete to work from. We include a photo report with every one, and we say clearly when a defect can wait and when it can’t.
Trusted Brands We Service in Midwood
When an inspection turns up liner damage, the fix is only as good as the material. We specify DuraFlex flexible liner systems for relining because they handle the offsets and transitions in old masonry stacks, and HeatShield ceramic flue-resurfacing for liner walls that are deteriorating but still structurally worth restoring. That HeatShield work is a specialist method most basic sweep companies aren’t equipped for. We also work with Gelco and Copperfield components to match the right part to each chimney’s specific configuration rather than defaulting to a one-size part. We don’t claim to stock parts locally; we specify the right one and get it moving.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Midwood Homes
- Cracked clay tile liners in shared stacks. Years of freeze-thaw cycling crack the original clay tile, and in a party-wall stack that means smoke and carbon monoxide can migrate into the adjoining attached home. This is why we inspect the neighbor’s side as part of a Level 2 here.
- Spalling crowns and deteriorated mortar joints. The crown is the concrete cap on top of the stack, and coastal freeze-thaw plus Nor’easter wind and salt-laden air break it down. Once it spalls, water gets into the flue and liner damage follows.
- Third-degree creosote glaze. Heavily used masonry fireplaces build up glazed, tar-like creosote that a standard brush won’t remove. It needs specialized inspection and treatment, and it’s a chimney fire hazard.
- Boiler flues sharing the stack. Many Midwood homes vent a boiler through the same chimney as the fireplace, and that shared load changes how the flue performs and what the inspection has to check.
Pricing for Chimney Inspection in Midwood, NY
A typical Level 1 inspection in Midwood runs $125 to $225 when booked with a sweep. A Level 2 with camera work runs $225 to $450, and a Level 3, which involves opening up part of the chimney, starts higher and is quoted after we see what’s involved. Camera and flue inspections generally fall in the $175 to $350 range. What moves the number is the condition of the stack and how accessible the roof is; tight attached rows sometimes mean more setup time. The written estimate sets the final price, and the estimate itself is free. Nothing gets recommended without camera evidence you can review yourself, and we’ll tell you when work can safely wait.
We Also Serve Cities Near Midwood
We work throughout Midwood and the neighborhoods around it, including Flatlands, Kensington, Bensonhurst, and Flatbush. Same dense brick housing, same shared stacks, same inspection approach. If you’re just outside Midwood, call and we’ll confirm coverage for your block.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Midwood
A Level 2 inspection on a shared party-wall stack covers your flue and the accessible portions of the adjoining side, plus the mortar joints where the two roofs meet, all photographed. Because the masonry is shared, a crack or missing crown on one side can carry smoke and carbon monoxide into the neighboring home, so checking both sides is standard for us in Midwood. Call (855) 924-3713 for an exact quote; estimates are free.
Once a year if you burn wood regularly, and a sweep whenever creosote builds to roughly an eighth of an inch. Midwood fireplaces see heavier use than much of Brooklyn, so the annual habit matters more here. Call (855) 924-3713 to book; estimates are free.
First-degree creosote is a light soot you can brush away; third-degree is a glazed, tar-like layer a standard brush won’t touch and a real chimney fire risk. Heavily used masonry fireplaces in Midwood commonly reach that third stage. Call (855) 924-3713 to schedule an inspection; estimates are free.
Yes. In an attached brick row, a cracked liner in a shared stack lets smoke and carbon monoxide pass into the adjoining house, which is why we inspect the neighbor’s side of the stack. Call (855) 924-3713 for an exact quote; estimates are free.
A Level 2 is the standard for a real estate transaction, because it includes camera evaluation of the flue and the shared masonry. We provide a photo report you can hand to a buyer or seller. Call (855) 924-3713 to schedule; estimates are free. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
If your fireplace is spilling smoke or you’re due for the annual check, don’t wait for the first cold night. Call (855) 924-3713 for a free estimate on chimney inspection in Midwood. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll show you exactly what we find.
Written by the team at Chimney Sweep Bensonhurst.