Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Midwood
If your cap is rusted through or your crown is shedding mortar, you’re probably wondering who can get up on the roof before the next storm. Chimney cap and crown work in Midwood usually runs $275 to $950 for a standard cap installation or crown repair, with custom and multi-flue units higher. We work on the attached and semi-detached brick rows that define this part of Brooklyn every week, and we know what a shared stack looks like from the roofline. Call (855) 924-3713. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Midwood Homeowners Call Chimney Sweep Bensonhurst for Chimney Cap & Crown
Cap and crown work on a Midwood roof is different from the suburbs. The houses sit close together, the roof pitches are steep, and the stack you’re capping is often the same stack the neighbor’s boiler vents into. We plan for that before anyone climbs a ladder. Our technicians have up to 12 years of experience, and they photograph the mortar joints where two roofs meet so both sides of a party-wall stack are documented.
We serve Midwood as part of our regular route through this stretch of Brooklyn, which means we’re not driving in from an hour away to look at your chimney. The local pro we connect you with is licensed and insured as their state requires, and you get a flat-price sweep agreed before booking. The estimate is free, the price is set per job by the written estimate, and a camera inspection with a photo report is included when the scope calls for one. That matters here: in a block of attached brick houses, what’s happening on your side of the wall usually tells you something about the other side too.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Midwood
Cap Installation
A new cap is the cheapest protection you can put on a Midwood chimney, and on an attached brick row it’s also a neighbor issue. We fit stainless and copper caps sized to the actual flue opening, not a hardware-store lid that rattles loose in a Nor’easter. On shared stacks we check whether the adjoining flue needs coverage at the same time.

Cap Replacement
Most caps we replace in Midwood are rusted out from salt-laden coastal air and years of freeze-thaw cycling. A rusted cap has usually been letting water into the flue for a while, so replacing it is a good moment to look down the liner. We match the replacement to the flue’s dimensions so it seats properly and seals at the crown.

Crown Repair
The mortar crown is the concrete collar at the top of the stack, and on the 1920s – 1950s brick chimneys throughout Midwood it’s the first thing to fail. Freeze-thaw cycles crack the crown, water tracks down to the smoke chamber, and the damage spreads. We rebuild cracked crowns with a proper slope so water sheds instead of pooling.

Crown Coating
When a crown is cracked but still structurally sound, a coating can extend its life without a full rebuild. We use HeatShield ceramic systems where the surface allows it. In a dense Midwood block, coating a crown is often the sensible middle option between ignoring a hairline crack and tearing the whole crown off.
For the full scope of what we do, see our chimney cap & crown services.
Trusted Brands We Service in Midwood
We work with professional-grade components from Copperfield, DuraFlex, Gelco, and Olympia Chimney, and we match the part to your chimney’s specific configuration rather than forcing a one-size cap onto every stack. On Midwood’s mixed housing stock, that distinction shows up fast: a two-to-three-story walk-up with a single clay tile flue takes a different cap than a semi-detached brick house with a multi-flue stack serving both a fireplace and a boiler. We specify Copperfield caps where durability under coastal weather matters most, and DuraFlex liner components when the cap work reveals a liner that needs attention at the same time. Brand names are only useful if the fit is right, so we measure before we order.
Common Chimney Cap & Crown Problems We See in Midwood Homes
- Missing or rusted-out caps on shared party-wall stacks. When a cap goes on one side of an attached chimney, rain and salt air get straight into the flue liner and speed up deterioration on both sides of the wall. In Midwood’s brick rows this is the most common thing we find on a first look.
- Spalling mortar crowns on 1920s – 1950s brick chimneys. Freeze-thaw cycles crack the crown, and once water gets in it tracks down to the smoke chamber and firebox. A crown that looks fine from the street can be crumbling at the top edge.
- One-sided cap or crown repairs. Fixing only your side of an attached stack leaves the neighbor’s flue or boiler vent unsealed, and smoke and carbon monoxide can cross into the adjoining house. We check both sides before calling the job done.
- Boiler vents sharing a stack with a fireplace. Many Midwood homes have a boiler venting through the same chimney as the fireplace. If the crown or cap fails, two appliances are affected at once, and the venting balance between them changes.
Pricing for Chimney Cap & Crown in Midwood, NY
Cap and crown work here is priced per job by a written estimate, and the ranges below are typical for Midwood’s market. A standard cap installation runs $275 – $550. A custom or multi-flue cap for a shared stack runs $500 – $950 depending on the number of flues and the metal you choose. Crown repair on a cracked collar runs $400 – $850, and crown coating runs $250 – $500 where the crown is sound enough to coat. What moves the number is roof access: a steep pitch on a tight Midwood street, a stack that needs scaffolding, or a party-wall situation where the adjoining owner needs to be involved. The estimate is free, and the written quote sets the final price. Call (855) 924-3713 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWhy Midwood Chimneys Are a Two-Property Concern
In the attached and semi-detached brick rows that make up most of Midwood, the chimney is frequently a shared or party-wall stack. That changes what cap and crown work means. On a detached house, a missing cap lets water into your flue and nobody else’s problem. On a shared stack, the flue serving your neighbor’s boiler may open into the same chimney your fireplace uses, and a spalling crown on one side of the roof can let smoke and carbon monoxide migrate into the adjoining house.
A typical Midwood call starts with a homeowner noticing draft problems, a smoke smell in an upstairs room, or a rusted-out cap after a Nor’easter. The technician often finds the crown mortar has spalled from damp and freeze-thaw cycling, or the cap is gone entirely on a shared stack. A qualified pro photographs the mortar joints where the two roofs meet, checks whether the neighbor’s flue or boiler vent opens into the same chimney, then replaces the cap – often a custom or multi-flue unit – while rebuilding or coating the crown. Documentation of the party-wall side means the adjoining owner knows exactly what was found.
Coastal Brooklyn’s damp winters and humid summers push moisture into un-capped brick, and the salt air accelerates crown and flashing decay on exposed roof stacks. That’s the failure mode we see most in Midwood, and it’s why annual sweeping and Level 1 or 2 inspections are a real safety habit here, not an upsell.
What to Check Before You Book Cap or Crown Work in Midwood
- Look for the cap from the ground. A rusted or absent cap is visible from street level on most Midwood houses.
- Check for mortar crumbs on the roof or sidewalk. Bits of crown mortar at the base of the stack usually mean the crown is failing.
- Note smoke smell in upstairs rooms. If smoke backs into the house on one side of an attached row, the shared stack may be the cause.
- Ask about the neighbor’s side. On a party-wall stack, both flues need coverage.
- Get the written estimate before work starts. The price is set per job, not by the hour.
We Also Serve Cities Near Midwood
If you’re just outside Midwood, we also connect homeowners in Flatlands, Kensington, Bensonhurst, and Flatbush with local chimney professionals. Roof access, housing stock, and party-wall stack layouts vary across these neighborhoods, so the estimate is per job wherever you are. Call (855) 924-3713 and we’ll talk about your address.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Midwood
Possibly, and it’s worth confirming before work starts. On a shared party-wall stack, the flue serving your neighbor’s boiler may open into the same chimney as your fireplace, and a cap that covers only your side can leave their flue unsealed. We check the party-wall side and photograph the mortar joints where the two roofs meet so the adjoining owner can see what was found. Call (855) 924-3713 for an exact quote – estimates are free.
Freeze-thaw cycling and coastal damp. The mortar crown takes the weather first, and once cracks open, water gets in and the damage moves down to the smoke chamber. Crown repair in Midwood typically runs $400 – $850, and coating runs $250 – $500 where the crown is still sound enough to coat. Call (855) 924-3713 for an exact quote.
Smoke and carbon monoxide can cross into the adjoining house if the crown or cap on either side fails. That’s why cap and crown work on a Midwood party-wall stack is a two-property job, not a single-house fix. The technician checks whether the neighbor’s flue or boiler vent opens into the same chimney before signing off on a new cap. Call (855) 924-3713 for an exact quote.
A camera inspection and a look at the cap from the roofline will tell you. A rusted cap needs replacement; a cracked but sound crown can often be coated; a spalled crown needs rebuilding. We show you the photos and tell you which applies, and we say plainly when work can safely wait. Call (855) 924-3713 for a free estimate.
Yes, especially in an attached brick row. In Midwood’s dense housing, a single blocked or cracked flue is a neighbor-to-neighbor fire risk, and a cap missing on a shared stack lets water into the liner for both sides of the wall. A Level 1 inspection catches most cap and crown problems before they spread. Call (855) 924-3713 for an exact quote – estimates are free.
When to Call for Cap and Crown Work in Midwood
If you’ve spotted a rusted cap, mortar crumbs on the roof, or smoke backing into an upstairs room, it’s worth having someone look before the next storm season. Cap and crown failures in Midwood tend to get worse through freeze-thaw cycles, and on a shared party-wall stack they affect the adjoining house too. A qualified pro photographs what they find so you can see it for yourself, not take it on trust. Call (855) 924-3713 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The local pro we connect you with is licensed and insured as their state requires, and the written estimate sets the final price.
Written by the team at Chimney Sweep Bensonhurst.