Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Bensonhurst Homeowners
A fireplace that smokes into the room, won’t stay lit, or smells of gas is a venting problem first and a cosmetic problem second. In Bensonhurst’s mix of early-1900s brick rowhouses and mid-century semis, we find fireboxes that have been patched with mortar over old firebrick, dampers rusted open, and gas logs installed without the venting they need. Our technicians have up to 12 years of experience and carry the diagnostic tools to trace a draft or a gas smell to its actual source. Same-day fireplace repair is often possible in Bensonhurst when you call early. Call (855) 924-3713 for a free estimate. We answer 24/7.
What Our Fireplace Repair Service Includes
Fireplace repair covers the firebox, damper, insert, gas components, and the venting that connects them. We handle all six of the jobs below under one call, from a sticking damper to a full insert service.
Gas Fireplace Repair
A gas fireplace that won’t light, burns with a lazy orange flame, or leaves soot on the logs is telling you something about gas flow or air mix. We check the burner, the orifice, the valve train, and the venting, then trace the fault before touching a part. If the issue is a blocked flue or a failed vent, we fix that rather than swapping components and hoping.
Wood Burning Fireplace Repair
Wood fireplaces fail in predictable ways here: cracked firebrick, a damper that no longer seats, a smoke shelf packed with old creosote, or a firebox that has pulled away from the surrounding masonry. We assess the firebox and smoke chamber, then repair or re-point what’s actually failing. Where the flue needs relining, we install DuraFlex flexible liner systems, which goes well beyond what a basic sweep crew can do.
Fireplace Insert Service
Inserts sit inside the firebox and rely on a properly sized liner to vent, so a poorly fitted insert is a carbon monoxide concern, not just an efficiency one. We check clearances to combustibles, the connection at the flue collar, and the liner run. If the insert was dropped into a fireplace with no dedicated liner, we can correct that with a listed liner sized to the unit.
Damper Repair
The damper is the metal plate above the fire that controls draft and keeps heated air from escaping up the chimney when you’re not burning. A damper that sticks open wastes heat all winter; one rusted shut means smoke in the room. We free, re-seat, or replace the damper and confirm it seals correctly.
Firebox Repair
The firebox takes the direct heat, and its firebrick and mortar joints crack from thermal cycling over time. We rebuild damaged joints with refractory mortar rated for the temperature, and for deteriorating flue walls we apply HeatShield ceramic flue-resurfacing, a specialist-only repair method most sweep companies aren’t equipped to perform. It restores the liner wall without a full reliner replacement when the damage is within its range.
Pilot Light Repair
A gas fireplace pilot that won’t stay lit usually points to a dirty orifice, a thermocouple or thermopile that has drifted out of spec, or a gas supply issue. We diagnose the safety system and replace what has failed, then verify the pilot holds and the main burner lights cleanly. We don’t leave a gas appliance running until it’s confirmed safe.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We service the brands that show up in Bensonhurst homes and know where each one wears. Gelco inserts and fireplaces are common in this area, and their damper and gasket wear points are ones we see regularly. Olympia Chimney venting components turn up on gas installations, and we know how their connections seat and where they leak when installed loosely.
Famco dampers and top-sealing hardware are another line we work with, and we specify Famco when the fit and the seal are what matter for a particular chimney. We also apply HeatShield and install DuraFlex liners because those materials hold up under the heat cycling a working fireplace sees. Whether you have Gelco, Olympia Chimney, Famco, or any other make, we can help.
Signs You Need Fireplace Repair Right Now
- Smoke rolling into the room. A fireplace that smokes when it didn’t before usually has a blocked flue, a failed damper, or a smoke chamber problem. It won’t clear on its own, and continued burning makes the blockage worse.
- A gas smell near the hearth. Any gas odor is a reason to stop using the fireplace and have it checked. We trace the source and confirm the appliance is safe before it goes back into service.
- Cracked firebrick or loose mortar joints. Cracks let heat and gases reach the masonry behind the firebox, which can degrade the structure. Early repair is far cheaper than rebuilding a firebox.
- A damper that won’t open or close. A stuck damper either wastes your heat up the flue or traps smoke indoors. It’s a small part with a real effect on how the fireplace performs.
- Soot on the logs or glass. In a gas fireplace, soot means the air-to-fuel mix or the venting is off. That points to a combustion problem worth diagnosing rather than wiping down.
Our Fireplace Repair Process – Step by Step
- 1
Walk-through and interview. We ask what you’re seeing and when it started, then look at the fireplace and the flue. The history you give us narrows the diagnosis faster than any tool.
- 2
Camera inspection of the flue and firebox. We run a camera through the flue and inspect the firebox, damper, and smoke chamber. You see the footage and photos, so nothing is recommended without evidence you can check for yourself.
- 3
Flat-price written estimate. We put the scope and the price in writing before any work starts, agreed before we book. If the repair can safely wait, we tell you that plainly; if it can’t, we explain why.
- 4
Repair with trade-grade materials. We complete the work using the right component for your chimney’s configuration, drawing from Famco, Olympia Chimney, HeatShield, or DuraFlex as the job calls for, rather than one-size-fits-all parts. Gas repairs get a safety check before we finish.
- 5
Final test and photo report. We test the fireplace under real burn conditions, confirm the draft and the damper, and leave you a photo report of what we found and what we did. Camera inspection and the photo report are part of the job.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Bensonhurst?
Typical fireplace repair in Bensonhurst runs from about $150 for a simple damper adjustment up to $1,800 or more for firebox rebuilding, with most jobs landing between $250 and $900 depending on the scope. Here’s how the common scenarios break down by estimated range.
| Repair | Typical Estimated Range |
|---|---|
| Damper repair or replacement | $150 – $450 |
| Pilot light and thermocouple repair | $150 – $350 |
| Gas fireplace diagnosis and repair | $200 – $600 |
| Firebox re-pointing or repair | $400 – $1,200 |
| HeatShield flue resurfacing | $800 – $1,800 |
| Insert service or liner correction | $500 – $1,500 |
What moves the price is scope, not location: how much firebrick needs rebuilding, whether the liner needs resurfacing or replacement, and whether the venting is correct for a gas insert. You avoid overpaying by getting the camera evidence first and a flat price in writing before work starts; if a quote arrives without photos or a scope, ask for both. Our free estimate includes the camera inspection, the photo report, and a written flat price agreed before we book, so the written estimate sets the final price and you know what you’re paying before we begin.
Fireplace Repair Near Bensonhurst – Our Service Area
We cover fireplace repair across Bensonhurst and the surrounding neighborhoods, including Gravesend, Dyker Heights, Midwood, Borough Park, Bay Ridge, and Sunset Park. Homes in these areas often share the same fireplace construction, so we know what to look for before we arrive. Travel time between these neighborhoods is short, and same-day repair is often possible when you call early. If you’re nearby and need fireplace repair, we’re close enough to make it easy.
Serving Bensonhurst, NY – Our Local Coverage Area
We serve Bensonhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Bensonhurst
Fireplace repair is the work of fixing the parts of a fireplace that control fire, draft, and venting: the firebox, damper, insert, gas components, and the flue behind them. It’s distinct from a routine cleaning because it corrects a fault rather than just removing soot. We handle chimney sweep and repair together, so a single visit can address both.
Most fireplace repairs take one to three hours, depending on the fault and whether parts are on hand. A damper fix or pilot light repair is often under an hour, while firebox rebuilding or flue resurfacing can run most of a day. We give you a realistic time window with the written estimate.
Typical fireplace repair in Bensonhurst runs $250 to $900 for most jobs, with simple repairs starting around $150 and firebox rebuilding or flue resurfacing reaching $1,800 or more. The written estimate sets the final price after we inspect. Call (855) 924-3713 for an exact quote; estimates are free.
We service the major brands found in Bensonhurst homes, including Gelco and Olympia Chimney, and we work with Famco dampers and HeatShield and DuraFlex materials. Whether your fireplace is a brand we named or another make, call and we’ll confirm we can help. If you already have fireplace repair scheduled nearby, we can look at your unit the same way.
Same-day fireplace repair is often possible in Bensonhurst when you call early in the day. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 924-3713 to schedule.
Yes, the work we do carries a satisfaction guarantee. If something we repaired isn’t working right after the job, we make it right. We’ll walk you through what the warranty covers on your specific repair when we give the written estimate.
Clear the hearth and the area in front of the fireplace, remove any logs or decorative items, and make sure we can reach the fireplace and the flue access. If you have gas, leave the supply on unless you smell a strong odor, in which case turn it off and call us first. Tell us what you’ve noticed about the fireplace so we can come prepared. Ready to book fireplace repair? Call (855) 924-3713.
Schedule Your Fireplace Repair Service in Bensonhurst Today
If your fireplace is smoking, won’t light, or smells of gas, don’t wait for it to get worse. Call (855) 924-3713 for a free, no-obligation estimate with camera inspection and a photo report you can see for yourself. Same-day repair is often possible when you call early, and the written estimate sets the final price before any work starts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bensonhurst.