Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Midwood
If your fireplace is smoking into the room, your damper won’t close, or your gas unit won’t hold a pilot flame, we handle the repair. Chimney Sweep Bensonhurst works on fireplaces and the chimneys that vent them throughout Midwood, from the attached brick rows off Ocean Avenue to the walk-ups near Avenue M. We know this housing: pre-war masonry fireplaces, clay tile flues, and a lot of shared stacks. That matters because a fireplace is only part of a venting system, and in Midwood the rest of that system often belongs to the house next door. Call (855) 924-3713. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Midwood Homeowners Call Chimney Sweep Bensonhurst for Fireplace Repair
Midwood’s fireplaces get real use. This is a neighborhood of Orthodox and Syrian Jewish families who light wood-burning fireplaces and inserts far more heavily than most of Brooklyn, which means the fireplaces here are working appliances, not decorative flues. When one stops drafting, people notice fast.
Our technicians have up to 12 years of experience, and that experience shows most clearly on attached properties: reading a party-wall stack, checking both sides of a flue, and knowing when a repair on your side can’t be signed off until the neighbor’s side is verified. We also carry the professional-grade lines that a full repair sometimes requires. HeatShield ceramic flue-resurfacing lets us restore a deteriorating liner wall without a full reliner in the right conditions, and DuraFlex flexible liners cover the cases that need a new listed system. A basic sweep company stops at the brush. We can finish the job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Midwood
Fireplace repair covers the firebox, damper, insert, and gas or wood-burning components inside the hearth. Each one has its own failure pattern, and in Midwood’s dense housing the consequences of a bad repair can cross a property line.
Wood Burning Fireplace Repair
Most wood-burning fireplaces in Midwood are original masonry builds from the 1920s through the 1950s. Cracks in the firebox brick, deteriorated mortar joints, and a smoke shelf packed with old creosote are the usual culprits when a fire won’t draft. We inspect the firebox and smoke chamber, repair the masonry, and check the flue above before we call the job done, because a firebox repair with a cracked liner above it doesn’t fix anything.
Firebox Repair
A firebox takes direct heat and direct moisture, which is why the brick and mortar inside it fail before anything else. In Midwood’s attached brick rows, water that gets past a failed crown or flashing runs down the flue and lands in the firebox, degrading the mortar from the inside. We rebuild firebox joints and parge surfaces using HeatShield where the condition allows, and we photograph the damage so you can see what we’re describing.
Damper Repair
A damper that sticks open, sticks shut, or no longer seals is one of the most common calls we get in Midwood. It’s also a draft problem with a safety angle: an open damper on an unused fireplace lets heated air escape all winter, and a damper that won’t open properly pushes smoke back into the room. We repair or replace top-mount and throat dampers, and we check the flue while we’re in there.
Gas Fireplace Repair
Gas fireplaces in Midwood’s low-rise apartment buildings and post-war homes fail in predictable ways: pilot lights that won’t stay lit, thermocouples that read wrong, burners with blocked ports. We diagnose the gas-side components and repair them. Any work on the gas line itself belongs with a licensed gas professional, and we’ll tell you plainly when that’s the case.
Fireplace Insert Service
Inserts are common in Midwood because they make an old masonry fireplace usable again. But an insert has to vent correctly through its own liner, and a retrofit into a shared clay tile flue without one is a real problem. We service inserts, verify the venting, and correct installations that were done without a dedicated liner.
Trusted Brands We Service in Midwood
We work with professional-grade, industry-recognized brands: DuraFlex flexible liner systems, HeatShield ceramic flue-resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield. These are the same supply lines used by certified chimney specialists, and we specify each one because it fits a particular chimney’s configuration and heat exposure, not because it’s what’s on the shelf. When a damper or a cap needs replacing, we match the component to your stack rather than defaulting to a hardware-store part. Because Midwood’s attached housing leaves little margin for a poor fit, that matters. We work from multiple professional supply lines so we can get the right part on the job without delay.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Midwood Homes
- A cracked clay flue liner in a shared party-wall stack. In attached and semi-detached brick houses, the flue on your side often runs beside the neighbor’s flue in the same stack. A crack lets smoke and carbon monoxide cross into the adjoining unit, which is why we check both sides before clearing a repair.
- A spalled crown and failed flashing on an exposed roof stack. Damp Brooklyn winters and Nor’easters work on mortar crowns and flashing, and once water gets in, it degrades the firebox and smoke chamber below. This is the dominant failure mode here, not a rare one.
- A boiler venting into the same chimney as the fireplace. Many Midwood houses have a heating boiler using the same stack. A damper or liner repair on the fireplace side can disrupt draft for the boiler, so the whole stack gets evaluated, not just the fireplace.
- Century-old firebox mortar softened by moisture. In 1920s-1950s masonry fireplaces, water intrusion from above turns firebox joints to sand. Rebuilding those joints without fixing the crown that let the water in just delays the next repair.
The shared-stack condition that defines fireplace repair in Midwood
Here is what separates Midwood from most of Brooklyn. In the attached and semi-detached brick rows, the chimney is frequently a party-wall stack shared with the neighbor. In a 1920s-1950s attached brick house, a wood-burning fireplace that once drafted well starts smoking into the room, and the cause is usually found at the top and inside the stack rather than at the firebox: a spalled mortar crown, a missing or rusted chimney cap letting coastal damp into the clay tile, and a cracked flue liner segment that lets draft and combustion gases cross into the neighboring side of the party-wall stack. A qualified local technician typically runs a Level 2 inspection with a camera, photographs the mortar joints where the two roofs meet, repairs the crown and firebox or smoke chamber as needed, and relines the flue with a listed system before the fireplace is returned to service. Roof access in these tight rows is part of the job. And no repair on one side of a shared stack counts as finished until the adjoining side is checked for crossover. That shared condition is rare in the detached parts of Brooklyn where each house vents independently.
Pricing for Fireplace Repair in Midwood, NY
Fireplace repair pricing is set per job by a written estimate, and the estimate is free. Typical ranges for Midwood are below.
- Damper repair or replacement: $180 to $450
- Firebox masonry repair: $400 to $1,200
- Gas fireplace pilot or burner repair: $150 to $400
- Fireplace insert service and venting correction: $300 to $800
- Chimney relining with a listed DuraFlex system: $2,200 to $5,500
- Level 2 camera inspection: $250 to $500
What moves the price is access to the roof stack, whether a liner is involved, and whether the crown or flashing needs work at the same time. In a shared party-wall stack, the inspection scope is wider because both sides get checked. You’ll get the written estimate before any work is booked, and we’ll tell you plainly when a repair can safely wait. Call (855) 924-3713 for a free estimate.
We Also Serve Cities Near Midwood
We handle fireplace repair for homeowners across Midwood and the surrounding neighborhoods, including Flatlands, Kensington, Bensonhurst, and Flatbush. The housing changes as you move between them, and so does what a fireplace typically needs. Call and we’ll book the right inspection.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Midwood
Yes. A cracked clay tile liner in a party-wall stack allows smoke and carbon monoxide to cross into the adjoining side of the chimney. That’s why a liner repair in Midwood’s attached housing has to include a check of the neighboring flue before the job is signed off, and why our technicians photograph the mortar joints where the two roofs meet. Call (855) 924-3713 to book a shared-stack inspection.
A smoking fireplace with an open damper usually points to a draft problem above the firebox, not inside it. In Midwood’s 1920s-1950s attached houses, spalled crowns, cracked flue liner segments, and a shared stack with a deteriorated neighbor’s side are the common causes. A camera inspection finds the actual reason. Call (855) 924-3713 for an estimate.
Yes, it does. When a boiler shares the stack with a fireplace, a damper or liner repair on the fireplace side can change the draft that the heating appliance depends on. The whole stack gets evaluated together so the repair doesn’t solve one problem and create another. Call (855) 924-3713 and we’ll explain what the inspection will cover.
Annually, and more often if it sees heavy use, which is common in Midwood’s actively used masonry fireplaces. An annual inspection catches liner cracks and crown damage while they’re still small repairs. The housing stock here is dense and attached, so one blocked or cracked flue is a neighbor-to-neighbor risk, not just yours. Call (855) 924-3713 to schedule.
Third-degree creosote is a hardened, glazed deposit that has baked onto the flue wall, and a standard brush won’t remove it. It requires chemical treatment or, in severe cases, resurfacing or relining. In Midwood’s older masonry flues, glazed creosote is a fire risk worth addressing before the heating season. Call (855) 924-3713 for an inspection and a free estimate.
Ready to fix the fireplace? Call (855) 924-3713 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Nothing is recommended without camera evidence you can see for yourself.
Written by the team at Chimney Sweep Bensonhurst.