Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Dyker Heights?
Chimney cleaning in Dyker Heights typically costs $150 to $375 for a standard sweep of a wood-burning flue, and most single-flue homes land around $200 to $275. A gas fireplace flue runs lower, usually $125 to $225, because the creosote load is lighter. Add an inspection and you’ll usually see $250 to $475 total, and the written estimate you get before any work starts is what sets the final price.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the technician who inspects is the one who can clean, repair and reline, so you’re not handed off to a second company halfway through. Call (855) 924-3713 for a free estimate.
Key Takeaways
- Standard wood-flue sweep in Dyker Heights: $150 to $375, most commonly $200 to $275.
- Gas fireplace flue cleaning: $125 to $225.
- Cleaning plus a Level 2 inspection: $250 to $475.
- Our technicians have up to 12 years of experience, and every estimate is free and in writing.
- The price is set per job by the written estimate, not by a flat rate read off a phone call.
Chimney Cleaning Cost Breakdown (2026)
Every chimney is a venting system, and what you pay reflects how much creosote, soot and obstruction has to come out of it and how much of the flue the technician can actually reach. Here’s how the line items usually break down in the Dyker Heights market for 2026.
| Line item | Typical range |
|---|---|
| Standard wood-burning flue sweep (single flue) | $150 – $375 |
| Gas fireplace flue cleaning | $125 – $225 |
| Second flue or second fireplace at the same visit | $85 – $200 |
| Level 1 visual inspection (often bundled with a sweep) | $0 – $100 |
| Level 2 inspection (camera through the flue) | $150 – $300 |
| Heavy creosote removal (glazed or third-degree buildup) | adds $75 – $250 |
| Animal nest or debris removal | adds $50 – $175 |
| Chimney cap installation (Famco or Copperfield) | $185 – $450 |
| Crown repair or rebuild | $300 – $1,200 |
| HeatShield ceramic flue resurfacing | $1,200 – $3,200 |
| DuraFlex flexible liner installation | $2,200 – $5,500 |
Those are estimates for planning, not quotes. A chimney that hasn’t been touched in several heating seasons costs more to clean than one swept annually, simply because there’s more to remove and the technician spends more time on the flue. Access matters too: a chimney whose cleanout door is blocked by shelving, or a flue that’s been capped over, changes how the visit runs. Cleaning is one line on that table; if the inspection turns up cracked liner walls, a failed crown or a missing cap, the repair ranges are there so you can see what the next step could cost before anyone recommends it. Nothing gets done without a written estimate first.
What Affects Chimney Cleaning Pricing in Dyker Heights
Two houses on the same block can see a $100 difference on a cleaning estimate, and it’s rarely about square footage. These are the factors that move the number most in this neighborhood.
- Creosote level. A light soot coat sweeps out quickly. Glazed, tar-like creosote that has baked onto the flue walls takes more passes and more time. Burning unseasoned wood makes this worse, and it’s the single most common reason a Dyker Heights cleaning runs toward the top of the range.
- How long since the last sweep. The chimneys that cost least are the ones swept every heating season. Skip three or four years and you’re paying for accumulated buildup rather than routine maintenance.
- Wood versus gas versus oil. The neighborhood has a lot of both wood-burning and gas fireplaces. A wood flue carries creosote; a gas flue carries less soot but still needs cleaning for dust, corrosion byproducts and spider webs. Oil-fired flues present their own buildup. Each fuel type prices differently.
- Flue configuration. A straight flue is quick work. An offset, a tight flue tile or a shared flue changes the brush and the technique. This is where the technician’s experience with different liner types matters, and it’s a big part of why we carry both DuraFlex and Olympia Chimney supply lines instead of pushing one product.
- Roof access and chimney height. A one-story parapet chimney is a different job than a three-story roofline on a lot where the chimney sits back from the street. Height and safe access both factor into the estimate.
- Condition found during inspection. Cleaning is often where problems are discovered. A cracked crown, deteriorated mortar or a crumbling liner wall all show up mid-sweep, and addressing them changes the total. Our HeatShield ceramic resurfacing capability is what lets us restore a deteriorating liner instead of jumping straight to a full reliner.
Why Chimney Cleaning in Dyker Heights Isn’t a Routine Chore
Houses here are close together and many were built with wood-burning or coal-era fireplaces later converted to gas. That means chimneys that were designed for one fuel and are now venting another, and the venting needs to be right for the fireplace that’s actually there. Creosote, soot and blocked flues are venting problems, not cosmetic ones: a restricted flue means smoke and combustion gases have somewhere other than up and out to go, and that’s a safety issue, not a housekeeping one.
This is why we treat a cleaning as an assessment as much as a service. A proper sweep tells you the state of the flue walls, the damper, the smoke chamber and the cap. When you call for a clean, you’re getting chimney sweep service in your area that starts with an inspection and ends with a written picture of what the chimney needs, if anything.
Clean, Inspect, Repair: What Each Stage Costs
Our five service lines exist because most chimneys need more than a brush from time to time. Chimney sweeping, chimney inspection, cap and crown work, chimney repair and fireplace repair all come up at different points, and knowing the price ranges for each keeps a small problem from becoming an expensive one.
A cleaning alone addresses buildup. A Level 2 inspection adds a camera run through the flue, which is how you find hidden cracks in a liner wall before they fail. If the inspection shows a damaged liner, a HeatShield ceramic resurfacing can restore it in many cases, and when it can’t, a DuraFlex flexible liner installs a new flue inside the old chimney. A chimney cap keeps water, animals and debris out, and we fit Famco and Copperfield caps matched to the chimney’s specific crown and flue size rather than a generic cover. Crown work and masonry repair round out the chimney repair line, and fireplace repair covers the firebox, damper and hearth. One call brings the right specialty to the job.
How Often Should You Schedule a Chimney Cleaning in Dyker Heights?
Once a year for a wood-burning fireplace is the standard, and more often if you burn frequently through the cold months. Gas fireplaces can often go longer between cleanings but still need an annual inspection, and any chimney that hasn’t been looked at since the last owner lived in the house should be inspected before its first fire. The reason for the yearly rhythm is simple: creosote accumulates even when the fire looks clean, and an inspection catches liner damage while it’s still a repair instead of a reline.
Fall is the busiest stretch, and it’s worth booking before the first cold snap rather than after the first smoky fire. Fast dispatch from 7am to 7pm, Sunday through Friday, makes it easy to fit a visit into a week.
How to Save on Chimney Cleaning
- Combine cleaning and inspection. When both happen on one visit, the inspection is usually bundled at or near no extra charge. Splitting them into two appointments costs more.
- Do the second flue at the same time. A house with two fireplaces often has two flues. Having both swept on one visit runs well below booking two separate appointments.
- Keep the chimney capped. A properly fitted cap pays for itself quickly by keeping rain, birds and debris out of the flue. Debris removal is a real line item you can avoid.
- Burn seasoned wood. Dry, well-seasoned wood produces less creosote than green wood, which keeps your cleaning at the low end of the range and cuts your fire risk.
- Ask for a written estimate before work starts. A specialist who publishes upfront pricing doesn’t surprise you later. Estimates from us are free, so call (855) 924-3713 and get a number in writing.
What Happens When You Call
We answer 24/7. You’ll describe the fireplace, how long it’s been since the last cleaning, and what’s prompting the call. We’ll set a visit window within fast dispatch hours, 7am to 7pm, Sunday through Friday. The technician inspects first, cleans, and leaves you with a written estimate for any repair the inspection turns up. You decide what to do from there. Nothing is done without your approval, and the price on the estimate is the price.
Our technicians have up to 12 years of experience and work with professional-grade components from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield, the same supply lines certified chimney specialists rely on. We can work with your insurer if a repair turns into an insurance matter. One call covers sweep, inspection, cap and crown, chimney repair and fireplace repair. Call (855) 924-3713 for a free estimate.
FAQs – Chimney Cleaning Cost in Dyker Heights
How much does a chimney cleaning cost in Dyker Heights?
A standard wood-burning chimney cleaning in Dyker Heights runs about $150 to $375, with most single-flue homes settling around $200 to $275. Gas fireplace flues cost less, typically $125 to $225. Call (855) 924-3713 for an exact quote, the estimate is free.
Is chimney cleaning more expensive if I add an inspection?
Adding a Level 2 inspection brings the total to roughly $250 to $475 when it’s done on the same visit as the cleaning. A basic Level 1 visual inspection is often bundled at no extra charge. Call (855) 924-3713 for an exact quote.
How often should I get my chimney cleaned?
Once every heating season for a wood-burning fireplace, and at least once a year for gas. Chimneys with heavy use or unseasoned wood may need it more often. Call (855) 924-3713 to schedule a cleaning and inspection together.
Does it cost more to clean a dirty chimney that hasn’t been swept in years?
Yes, usually by $75 to $250, because glazed creosote and heavy buildup take more passes than routine soot. It’s still far cheaper than repairing the damage buildup can cause to a liner wall. Call (855) 924-3713 for a written estimate.
Is it cheaper to repair a damaged liner or replace it?
Resurfacing with HeatShield typically runs $1,200 to $3,200, while a full DuraFlex liner replacement runs $2,200 to $5,500, so resurfacing is the lower-cost route when the liner wall can support it. A Level 2 inspection determines which applies. Call (855) 924-3713 for a free estimate.
Can you come today?
Same-day visits are available, with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7. Call (855) 924-3713 and we’ll book the next opening for you.
How do I know if my chimney needs cleaning or repair?
Signs include a smoky fire, a strong odor when the fireplace isn’t in use, visible creosote at the damper, or crumbling mortar at the crown. A camera inspection confirms which it is. Call (855) 924-3713 and we’ll inspect before recommending any work.
Pricing reflects the Dyker Heights market as of 2026. Chimney Sweep Bensonhurst offers free estimates – call (855) 924-3713.
Written by the team at Chimney Sweep Bensonhurst.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Robert Reed"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Wade Fletcher"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Danielle Quinn