Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Bensonhurst Homeowners
If your fireplace has started smoking into the room, or you can smell last winter’s fires in July, creosote has likely built up inside a flue you can’t see. A chimney is a venting system, and once airflow drops, smoke and carbon monoxide have somewhere to go other than up. Our technicians have up to 12 years of experience, and every visit starts with a camera inspection you watch on screen. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday, so booking a sweep is usually a same-week conversation. Call (855) 924-3713.
What Our Chimney Sweep Service Includes
A sweep is the entry point, not the whole job. Depending on what the camera shows, the work we do under this one service covers six distinct tasks. Here is what each one involves and when it applies to a Bensonhurst fireplace.
Level 1 Inspection
A Level 1 inspection is a visual check of the readily accessible parts of your chimney and venting system, done alongside a routine sweep. It’s what you need when nothing has changed and the appliance is still burning as it always has. We look at the firebox, damper, flue interior as far as the eye reaches, the cap, and the exterior where it meets the roof, and we photograph anything that looks off. If the flue is lined, vented correctly, and clear of obstruction, a Level 1 closes the job.

Level 2 Inspection
A Level 2 inspection is the same visual check plus a video scan of the entire flue interior, top to bottom. It’s called for after a chimney fire, a change of fuel or appliance, a property sale, or when a Level 1 finds something inconclusive. Our technicians run a camera down the flue and record the footage, so you see the liner walls, joints, and any gaps or spalling exactly as we do. Nothing gets recommended from this scan without that footage in front of you.

Creosote Removal
Creosote is the tar-like residue left when wood smoke cools on the flue walls, and it’s the fuel that makes chimney fires possible. It forms in stages, from soft soot to a glazed, hardened crust that a brush alone won’t shift. We assess the stage first, then remove it with the right method for that stage, because scraping the wrong way can damage a liner. If the deposit is glazed and heavy, that conversation gets specific: the flue gets restored, not just brushed.

Soot Removal
Soot is the lighter, powdery deposit that settles in the firebox, on the smoke shelf, and around the damper. Left alone it dulls draft, stains the hearth, and drifts into the room whenever the fireplace is used. We vacuum the firebox and smoke chamber with HEPA equipment, wipe down the surround and glass, and put down drop cloths before any of it starts. You shouldn’t be able to tell a sweep happened except by looking inside the firebox.
Annual Sweep
An annual sweep is the once-a-year cleaning that keeps the venting system performing and gives us a baseline to compare against next season. It’s the right cadence for most wood-burning fireplaces in regular winter use, and it’s when small problems are cheapest to catch. The sweep includes the flue brushing, the firebox and smoke chamber cleaning, and the inspection that tells you whether anything else is worth doing now. If the flue is clean and the liner is sound, we say so and leave it at that.
Fireplace Cleaning
Fireplace cleaning covers the hearth, glass doors, grate, andirons, and the surrounding masonry surfaces, inside and out. Gas fireplaces need this too, since ports and logs collect dust that dulls the flame and can throw off combustion. We clean the components, check that the logs and media sit as intended, and confirm the venting routes correctly. It’s a service most people skip until the glass goes opaque, and it’s usually the cheapest way to get a fireplace looking and burning right again.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Sweep
We work with professional-grade components from HeatShield, Gelco, Olympia Chimney, and Famco, and we know how each one wears because we see them in service, not just on a shelf. HeatShield ceramic flue-resurfacing systems are specialist equipment for restoring a deteriorating liner wall without pulling the whole liner out, and knowing when a HeatShield restoration is the right call versus when it isn’t comes from reading the flue, not from a sales sheet. Gelco and Olympia Chimney components show up in caps, dampers, and liner assemblies around Bensonhurst, and their fit and heat tolerance change how a repair gets built.
Famco parts are common in older venting setups, and matching a component to the chimney’s actual configuration matters more than defaulting to whatever is easiest to source. We specify the brand that fits your flue, not the one that’s convenient. Whether you have HeatShield, Gelco, Olympia Chimney, Famco, or any other make, we can help.
Signs You Need Chimney Sweep Right Now
- Smoke rolling back into the room. A fireplace that used to draw well and now spills smoke is telling you the flue is restricted or the draft has been compromised. It’s the most common sign of a blocked or heavily coated flue, and it gets worse the longer it’s ignored.
- A strong creosote smell in warm weather. That campfire odor in July means deposits are sitting in the flue and off-gassing as the air warms. It’s a clear signal that a sweep is overdue, not a seasonal quirk.
- Black staining on the chimney exterior or cap. Staining above the firebox or around the crown usually means the flue is venting poorly and pushing residue out the wrong places. It often pairs with a draft problem you’ve already noticed inside.
- Visible soot or flaking on the firebox walls. Heavy soot buildup and flaking creosote in the firebox point to incomplete combustion and a flue that needs cleaning. A camera scan tells you whether the liner is involved.
- It’s been more than a year since the last sweep. Even a lightly used fireplace accumulates deposits over a season, and a year is a reasonable interval to check. If you can’t remember the last sweep, that’s reason enough to book one.
Our Chimney Sweep Process – Step by Step
- 1
Walkthrough and appliance check. We start at the firebox, asking how you burn, what you burn, and what you’ve noticed. That conversation shapes the inspection, since a wood stove and an open hearth need different attention.
- 2
Camera inspection of the flue. We run a video camera down the flue and record the interior, checking liner walls, joints, and any obstruction. You watch the monitor with us, so the diagnosis isn’t a mystery.
- 3
Containment and sweep. Drop cloths go down, the work area gets sealed, and the flue is brushed with the right tool for the deposit stage. Our vacuum setup runs HEPA filtration so soot stays out of your living space.
- 4
Firebox, smoke chamber, and cap cleaning. We clean the firebox, smoke shelf, damper, and the cap and screen up top. A blocked cap screen is a common cause of poor draft, and it’s easy to miss from the ground.
- 5
Report and written estimate. You get the camera footage, a plain explanation of what we found, and a written estimate for anything beyond the sweep. The flat price is agreed before booking, and if work can safely wait, we tell you so.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Sweep Cost in Bensonhurst?
A standard annual sweep with a Level 1 inspection in Bensonhurst typically runs $180 to $320, depending on the flue configuration and how much deposit has built up. A Level 2 inspection with camera footage usually lands around $275 to $450 when it’s booked on its own. Creosote removal on a heavily glazed flue runs higher, often $400 to $900, because the deposit has to be treated rather than brushed. Fireplace cleaning for a gas unit typically sits in the $150 to $280 range.
| Service | Typical Estimate |
|---|---|
| Annual sweep with Level 1 inspection | $180 – $320 |
| Level 2 camera inspection | $275 – $450 |
| Creosote removal (glazed or heavy) | $400 – $900 |
| Fireplace cleaning (gas unit) | $150 – $280 |
What moves the number: flue height and access, whether the appliance is wood or gas, the stage of the creosote, and whether a cap or damper needs attention at the same time. You avoid overpaying by insisting on camera evidence before any repair gets approved, and by getting the flat price in writing before the crew arrives. Our estimates are free, nothing is added to the bill beyond what’s in the written estimate, and if the sweep is all that’s needed, that’s what you’ll be quoted. Call (855) 924-3713 for an exact quote.
Chimney Sweep Near Bensonhurst – Our Service Area
We connect homeowners across southern Brooklyn with independent local chimney professionals, and Bensonhurst sits in the middle of that map. Neighbors in Gravesend, Dyker Heights, Midwood, Borough Park, Bay Ridge, and Sunset Park are all within reach of a booked visit. If you’re searching for a chimney sweep closer to home, that page covers the same service. The local pro is licensed and insured as their state requires, and dispatch runs from 7am to 7pm, Sunday through Friday.
Serving Bensonhurst, NY – Our Local Coverage Area
We serve Bensonhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Sweep in Bensonhurst
A chimney sweep is a professional cleaning of the flue, firebox, and smoke chamber to remove soot and creosote, paired with an inspection of the venting system. It’s not just a cleaning: it’s the annual check that tells you whether the chimney is safe to use. At Chimney Sweep Bensonhurst, the sweep includes a Level 1 inspection and camera documentation of anything found. Call (855) 924-3713 for an exact quote.
A standard sweep with a Level 1 inspection usually takes 45 minutes to an hour and a half for a single flue. A Level 2 camera inspection adds time, typically 90 minutes to two hours total. Heavily glazed creosote can stretch the visit further because the deposit needs treatment, not just brushing. We’ll tell you the expected window when you book.
A typical sweep with inspection in Bensonhurst runs $180 to $320, and a Level 2 camera inspection usually falls between $275 and $450. Creosote removal on a glazed flue can run $400 to $900 depending on severity. The written estimate sets the final price, and estimates are free. Call (855) 924-3713 for an exact quote.
Yes, we work with HeatShield ceramic flue-resurfacing systems and Olympia Chimney components, along with Gelco and Famco. Our technicians read the flue first and specify the brand that fits the configuration. Whether it’s a restoration or a component replacement, you see the camera evidence before anything is approved. Call (855) 924-3713 to book an inspection.
Same-day sweeps are often possible when you call early. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 924-3713 and we’ll find the nearest slot.
Workmanship on sweeps, inspections, and repairs is backed by our satisfaction guarantee. If something isn’t right after the visit, call us and we’ll make it right. The local pro performing the work is licensed and insured as their state requires. Call (855) 924-3713 with any questions about coverage.
Clear the hearth and a few feet in front of the fireplace, and move anything breakable off the mantel. Don’t burn for at least 24 hours before the appointment so the flue is cool. If you have the last inspection report, have it handy. That’s all you need to do; the rest is on us. Call (855) 924-3713 to schedule.
Schedule Your Chimney Sweep Service in Bensonhurst Today
A sweep is a small appointment that answers a big question: is your chimney safe to burn? Book with Chimney Sweep Bensonhurst and you get camera evidence, a flat price agreed before we arrive, and a straight answer about what can wait. Call (855) 924-3713 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You can also read more about our chimney sweep in Bensonhurst service, or check our chimney sweep and chimney sweep pages for nearby areas.
Written by the team at Chimney Sweep Bensonhurst.