Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Bensonhurst Homeowners
If you burn wood in a Bensonhurst rowhouse or a semi-detached on one of the blocks off 86th Street, your chimney is doing real work every winter, and the only way to know it’s venting safely is to look inside it. A chimney inspection is a documented assessment of the flue, firebox, cap, crown and connected appliance, done with a camera and a checklist rather than a guess from the sidewalk. Our technicians have up to 12 years of experience, and every inspection comes with a camera scan and a photo report you keep. We can often book a Bensonhurst inspection the same day, and the estimate is free. Call (855) 924-3713. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Inspection Service Includes
Chimney inspection isn’t one procedure. The trade recognizes three levels, and the level you need depends on what’s happening with your chimney, not on what’s easiest to sell. Here’s what each one involves and when it applies.
Level 1 Inspection
A Level 1 inspection is a visual check of all readily accessible parts of the chimney and venting system: the firebox, damper, smoke chamber, flue from below, and the exterior at the roofline where we can see it safely. It’s the right call when your appliance hasn’t changed, you haven’t moved anything, and you just want confirmation the system is clear and sound before the heating season. We do a Level 1 as part of every routine sweep, and we write down what we find instead of telling you over the phone and moving on.
Level 2 Inspection
A Level 2 inspection adds a full video scan of the flue interior from top to bottom, plus a look at accessible attic and crawlspace areas where the chimney passes through. You need one after a chimney fire (even a small one you put out yourself), after a change in fuel or appliance, when you’ve had a flue liner replaced, or when you’re buying or selling a home. This is where most real problems surface, because a camera sees cracks, gaps and spalled mortar that a flashlight from the firebox never will. We hand you the footage and stills, not just a verdict.
Level 3 Inspection
A Level 3 inspection is the deepest level, and it’s only warranted when a Level 1 or Level 2 has already found a problem in a concealed area, like behind masonry, inside a chase, or under a crown that’s failed. It may mean removing parts of the chimney or adjacent building material to get access, so we explain exactly what has to be opened and why before anyone touches a thing. We don’t recommend a Level 3 unless the evidence from a lower level points to it, and we tell you plainly when a repair can safely wait.
Camera Inspection
A camera inspection is a video scan of the flue using a specialty camera run through the chimney. It’s the tool that turns “your liner might be cracked” into a photo you’re looking at yourself. We use it on any flue we can’t fully assess visually, and the recording goes into your report so you have a record of the chimney’s condition over time. Nothing gets recommended off a camera scan you haven’t seen.
Flue Inspection
A flue inspection focuses specifically on the flue, the channel that carries smoke and gases out of the house, checking for blockages, creosote buildup, cracked tile, deteriorated mortar joints and gaps at connections. Blocked or damaged flues are the usual cause of poor draft and of smoke spilling into a room. We check the flue on its own when draft problems are the complaint, and we can measure and document it if a liner repair or relining is being considered.
Real Estate Inspection
A real estate inspection (a Level 2, done for a transaction) is what a buyer or seller needs before closing, because the chimney is one of the most commonly deferred items in a Bensonhurst resale. We provide a documented report with photos that a buyer, seller and their attorneys can work from, and we separate “needs attention before you light a fire” from “watch this over time.” If you’re in the middle of a purchase, book it early in the process so findings can be addressed in negotiation rather than after closing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We inspect and work with HeatShield ceramic flue-resurfacing systems and can tell you whether a flue is a candidate for resurfacing rather than full relining. HeatShield is a specialist method for deteriorated liner walls, applied in place, and it’s outside what a basic sweep company is set up to do. When we scope a flue that’s been resurfaced, we know how the ceramic layer ages and where to look for separation at the joints.
We also work with Gelco, Olympia Chimney and Famco components, which means when an inspection turns up a cap, crown or liner that’s failed, we can match the right part to your chimney’s configuration instead of forcing a one-size-fits-all replacement. Whether you have a flue built around these products or any other make, we can help, and we’ll say so straight if what you have is fine as it is.
Signs You Need Chimney Inspection Right Now
- Smoke backing into the room. If a fire smokes into the house instead of drafting up, the flue is likely blocked, undersized or damaged. It’s a venting problem first and a comfort problem second.
- A chimney fire you put out yourself. Even a small chimney fire can crack tiles and open gaps in mortar that only a camera will show. A Level 2 inspection after any fire is the right move before you burn again.
- Creosote buildup you can see or smell. Heavy, tar-like creosote in the firebox or flue is fuel sitting in the chimney. A sweep and inspection together deal with it; a sweep alone won’t tell you the state of the liner behind it.
- Water, staining or a crumbling crown. Rust stains, white leaching on exterior brick or a crown that’s cracked and spalling all point to water getting in. Left alone, that damage moves inward toward the flue and the framing around it.
- You’ve just bought or are selling a home. You have no history with that chimney, and neither does the seller’s disclosure. A documented inspection before closing protects you on both sides of the deal.
Our Chimney Inspection Process – Step by Step
- 1
We talk through the symptoms first. Before any tool comes out we ask what you’re seeing: smoke, smell, water, draft, a recent fire, a change of appliance. That conversation decides which level of inspection makes sense, so you’re not paying for depth the situation doesn’t call for.
- 2
We do a visual walk-around and a look from below. The exterior at the roofline, the cap, the crown, the firebox, damper and smoke chamber all get checked against a written checklist. Anything we can photograph, we photograph.
- 3
We run the camera through the flue. A video scan from the top down (or bottom up, depending on access) shows cracks, gaps, spalled mortar and blockages the eye can’t reach. This is the part that makes the diagnosis something you can verify yourself.
- 4
We write it up and show you the evidence. You get a report that separates urgent safety items from things that can wait, with the photos and footage attached. We explain what we found and what it would take to fix it, and you decide.
- 5
If work is needed, we quote it on the spot. Sweep, cap and crown, liner work or fireplace repair can all be booked from the same visit. No referral out, no “we’ll have someone call you.”
How Much Does Chimney Inspection Cost in Bensonhurst?
Chimney inspection in Bensonhurst typically runs from around $125 to $350 for a Level 1, with a Level 2 (camera scan plus report) generally in the $200 to $450 range. A Level 3, which involves opening up part of the structure to reach a concealed problem, is quoted per job once we know the scope. If you have a routine sweep and a Level 1 done together, that’s usually the most economical way to start the season.
| Service | Typical Bensonhurst range |
|---|---|
| Level 1 inspection | $125 – $350 |
| Level 2 inspection (camera + report) | $200 – $450 |
| Flue inspection (focused) | $150 – $325 |
| Real estate inspection (Level 2, documented) | $250 – $500 |
| Level 3 inspection | Quoted per job after scope is confirmed |
What moves the number: how accessible the flue is, how much buildup has to be cleared before the camera can see clean walls, whether the roof access is straightforward or requires extra rigging, and whether the inspection is combined with work. You avoid overpaying by asking what level you’re getting and why, and by getting the report in writing with photos. Every estimate is free and the written estimate sets the final price. The local pro who performs the work is licensed and insured as their state requires. Call (855) 924-3713 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterChimney Inspection Near Bensonhurst – Our Service Area
We serve Bensonhurst and the surrounding neighborhoods, including Gravesend, Dyker Heights, Midwood, Borough Park, Bay Ridge, Sheepshead Bay, Kensington, Flatlands, Brighton Beach, Sunset Park and Coney Island. Response times depend on where you are and what’s booked, and most requests get scheduled the same day. If you’re nearby, a chimney inspection is one call away, and so is one in Dyker Heights. Call (855) 924-3713 to book.
Serving Bensonhurst, NY – Our Local Coverage Area
We serve Bensonhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Bensonhurst
A chimney inspection is a documented check of your chimney and venting system to confirm it’s clear, sound and venting safely. It covers the firebox, damper, flue, cap and crown, and on a Level 2 or 3 it includes a video scan of the flue interior. The point is to catch problems before they become fires or carbon monoxide risks, and to give you evidence in writing of what was found. Call (855) 924-3713 for an exact quote.
A Level 1 inspection usually takes 30 to 45 minutes, and a Level 2 with a camera scan runs 45 minutes to 1.5 hours depending on access. A Level 3 takes longer because it may involve opening up structure, and we scope the time with you before starting. We try to complete the inspection and any cleaning in a single visit where possible. Call (855) 924-3713 to book.
Most Level 1 inspections in Bensonhurst run $125 – $350, and a Level 2 with camera and report generally runs $200 – $450. The final number depends on access, buildup and whether it’s combined with a sweep. Every estimate is free, and the written estimate sets the price before work begins. Call (855) 924-3713 for an exact quote.
Yes. We inspect and work with HeatShield ceramic flue-resurfacing systems, Gelco, Olympia Chimney and Famco components as part of our inspection and repair work. That means when an inspection turns up a failed liner, cap or crown, we can evaluate the right fix rather than referring you out. Whether you have these brands or any other make, we can help. Call (855) 924-3713 for an exact quote.
Same-day inspection is often available in Bensonhurst depending on the schedule. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. A call outside dispatch hours is booked into the next opening. We’re closed Saturday. Call (855) 924-3713 to check availability.
Yes. Every inspection comes with our satisfaction guarantee and a written report with photos and video. If something we flagged turns out to be different than we represented, we’ll come back and look again. The report is yours to keep regardless of whether you have us do any repair. Call (855) 924-3713 for an exact quote.
Clear the fireplace area, remove ashes from the firebox, and make sure we can get to the hearth and, if needed, the roof access. Don’t light a fire for at least 24 hours before the visit so the flue is cool. Have any appliance documentation or prior inspection reports handy if you have them. Tell us about any recent chimney fire, even a small one. Call (855) 924-3713 to book.
Schedule Your Chimney Inspection Service in Bensonhurst Today
Book a chamber-of-the-flue scan and a written report you can trust. We can often get to Bensonhurst the same day, and every inspection includes a camera scan and photo report at no obligation. Call (855) 924-3713. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the price.
Related Services in Bensonhurst
Keeping your whole venting system in one relationship means one call covers the sweep, the inspection and any repair that follows. Alongside inspection, we handle Chimney Sweep Bensonhurst, chimney inspection for a second look, and the chimney cap and crown work that protects a sound flue from water. Call (855) 924-3713 for any of them.
Written by the team at Chimney Sweep Bensonhurst.