Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Borough Park
If the cap on your chimney is loose, rusted, or gone, or the crown at the top of the stack has a crack you can see from the fire escape, call (855) 924-3713. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. We handle chimney cap and crown work across Borough Park, from the dense brick blocks off 16th Avenue to the newer semi-detached homes near 50th Street, and we know how these roofs are built because we work on them. Cap and crown problems here are rarely cosmetic. A failed crown lets water into masonry that then freezes, and a loose chase cover lets it into a prefab chimney you can’t see from the ground. We give a written estimate per job before anything is booked. The local pro who does the work is licensed and insured as their state requires.
Why Borough Park Homeowners Call Chimney Sweep Bensonhurst for Chimney Cap & Crown
Most of the chimneys we look at in Borough Park aren’t simple. Post-war brick two- and three-story homes were often subdivided, and a single masonry stack can carry a boiler, a water heater, and an apartment fireplace at once. That means a “cap job” can turn into a draft and fire-separation question fast. We plan for that, and we don’t hand you a quote before we’ve actually seen the top of the chimney.
Our technicians have up to 12 years of experience, and the company covers five service lines under one roof: sweep, inspection, cap and crown, chimney repair, and fireplace repair. When the crown needs patching and the chase cover needs replacing, it’s the same relationship, not two companies pointing at each other.
We work with professional-grade brands the trade actually specifies: Copperfield and Gelco for caps and crowns, DuraFlex for liner systems, HeatShield for flue resurfacing. Nothing is recommended without camera evidence you can look at yourself, and if the work can wait a season, we’ll tell you that plainly.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Borough Park
Cap Installation in Borough Park
A proper cap keeps rain, birds, and downdraft out of the flue, and it has to fit the actual opening, not a stock size from a shelf. In Borough Park’s factory-built fireplaces, the cap is often manufacturer-specific, and a universal replacement will not seat or seal the way the original did. We match the component to the chimney’s configuration and specify Copperfield or Gelco where the fit calls for it.

Cap Replacement in Borough Park
When a prefab cap has rusted through or a chimney cap has come loose in a freeze-thaw winter, replacement is the fix. We pull the old unit, check the flue top and chase for water damage, and install a cap sized to the flue. If the cap failed because the chase cover underneath was already cracked, we say so before installing a new cap over a bad base.

Crown Repair in Borough Park
The crown is the concrete or prefab slab that sheds water away from the flue. On the older brick stacks around Borough Park, spalling mortar and cracked crowns are common after a long freeze-thaw season, and on newer factory-built units the crown can develop hairline cracks that never show from the street. We repair the crown at the top of the stack to restore the slope that sends water off the chimney instead of into it.

Crown Coating in Borough Park
A crown coating seals the surface against the moisture that drives cracking, and on a crown that’s still structurally sound it’s the right call rather than a rebuild. We use HeatShield ceramic systems where the crown or flue wall needs resurfacing, which restores the surface without tearing out a liner that still has life in it. This is a specialist method most basic sweep companies aren’t set up to perform.
Trusted Brands We Service in Borough Park
We work with Copperfield, Gelco, DuraFlex, and HeatShield because these are the lines certified chimney specialists specify, and because in a Borough Park prefab chase the right part is the one that matches the manufacturer’s spec, not the closest thing on a shelf. We don’t claim to stock parts locally. We assess the chimney, identify the correct component, and source it through professional supply lines so the job gets done right the first time rather than patched with a universal fit. Call (855) 924-3713 with your chimney’s make and model if you have it, and we’ll take it from there.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Borough Park Homes
- Loose or cracked prefabricated chase covers. New York’s freeze-thaw winters work on the seams of a chase cover until water gets behind it, and the rust starts at the firebox below. By the time you notice anything inside, the chase has usually been wet for a season or more.
- Hairline cracks in factory-built chimney crowns. These are the failure mode newer Borough Park homes are prone to: a crown that looks fine from the yard but has cracked at the surface, letting water into the liner and throwing off draft. A ground-level look won’t catch it. A Level 2 inspection will.
- Wrong cap on a manufacturer-specific flue. A prefab fireplace needs the cap built for its system, and a universal cap that doesn’t seal creates downdraft and creosote buildup. That’s a draft problem and a fire risk in the same unit.
- Multiple appliances vented into one stack. In Borough Park’s shared masonry chases, a boiler, a water heater, and a fireplace can vent together, so a cap or crown problem on one flue affects the draft on all of them. This is where a routine cap job becomes a real safety evaluation.
Pricing for Chimney Cap & Crown in Borough Park, NY
Typical estimated ranges for Borough Park: a standard cap installation runs about $180 to $420, a manufacturer-specific cap for a factory-built fireplace runs $250 to $550, crown repair runs $350 to $850, and crown coating runs $300 to $700. A custom cap for an odd flue size or multi-flue chase can go higher, and a crown repair that turns into masonry work will too, which is why we quote after inspection, not before. A Level 2 inspection with a camera report is included where the job needs it, so you can see the crack before you approve the repair. The written estimate sets the final price, and getting that estimate is free. Call (855) 924-3713.
We Also Serve Cities Near Borough Park
We work across the neighborhoods around Borough Park, including Sunset Park, Kensington, Dyker Heights, and Bensonhurst. The housing stock changes block by block, from pre-war walk-ups to newer semi-detached brick, so the right cap or crown approach shifts with it. If you’re in Borough Park and your chimney needs a look, our chimney cap & crown team is one call away.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Borough Park
Yes. A newer home with a factory-built fireplace still needs an annual Level 2 inspection, because the failures that matter in prefab systems are the ones you can’t see from the street. Freeze-thaw cycles and humid summers can crack a prefab crown or loosen a chase cover on a chimney that still looks perfect from the sidewalk, and once water gets inside the chase, it rusts the firebox and damages the whole assembly. The inspection is the only way to catch it early. Call (855) 924-3713 for a free estimate.
The manufacturer-specific cap for your fireplace system is best, not a universal fit. Factory-built fireplaces are designed around a particular flue size and chase configuration, and a cap that doesn’t seal to spec creates downdraft and lets creosote build up in the wrong places. We match the cap to the make and model, sourcing through professional lines like Copperfield or Gelco, and we check the chase cover while we’re up there. Call (855) 924-3713 and have your model number handy if you can.
You usually can’t tell from the ground, which is exactly the problem. Hairline cracks in a factory-built crown are often invisible from the street and only show up on a close inspection with a camera, but the signs inside the house are water staining around the firebox, rust on the chase, or a fireplace that drafts poorly. A Level 2 inspection is the reliable way to know. Call (855) 924-3713 to book one.
Often yes, but only if the chase cover underneath is still sound. If the cover is cracked or rusting, a new cap over a failing base just traps the same water problem in a new spot, so we inspect the cover first and tell you plainly whether it can stay. When it can, we replace the cap alone and save you the cost of the full cover. Call (855) 924-3713 for a free estimate.
Freeze-thaw cycles and humid summers are hard on a cap’s seams and finish, and a cap that wasn’t built for a prefab chase will start rusting years before it should. Salt isn’t the issue here, the moisture cycling is: water collects at seams, freezes, and works the metal loose. The fix is the right cap for the system plus a check of the chase cover. Call (855) 924-3713 and we’ll take a look.
Whether your chimney crown has cracked after another winter or your prefab cap has come loose, the answer starts with seeing the top of the stack, not guessing at it. We give a written, per-job estimate before anything is booked, nothing gets recommended without camera evidence you can see, and we’ll tell you when a repair can safely wait. Call (855) 924-3713 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bensonhurst.