Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Kensington?
Chimney cleaning in Kensington typically costs $180 to $340 for a standard sweep of a single wood-burning flue, and most homes here land near the middle of that range. A gas fireplace or a quick connect-and-clean appointment often runs $99 to $175, while a full Level 2 inspection with a camera adds $150 to $325 on top of the sweep. If the technician finds glazed creosote or a damaged liner, repair pricing starts in the high hundreds and moves up from there.
Those numbers are estimates, not a quote. The written estimate you get before work begins is what sets the final price, and there’s no charge for the visit that produces it. Our technicians have up to 12 years of experience reading exactly the kind of aging flues and older heating setups common in Kensington houses.
Key Takeaways
- Typical sweep cost in Kensington: $180 to $340 for one flue.
- Gas fireplace cleaning: $99 to $175.
- Level 2 camera inspection: adds $150 to $325.
- Stubborn glazed creosote (Stage 3) can push the job past $600.
- Repairs, relining, and cap work are priced separately.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the line items stack up in the Kensington market for 2026. Every figure is a typical estimated range, and your written estimate pins down the actual number for your chimney.
| Service | Typical Estimated Range | What It Covers |
|---|---|---|
| Standard chimney sweep (wood, one flue) | $180 – $340 | Rod-and-brush cleaning, soot and creosote removal, firebox cleanup |
| Gas fireplace cleaning | $99 – $175 | Vent check, debris removal, basic service of the appliance vent |
| Level 1 inspection (with sweep) | Usually included | Visual check of accessible portions of the flue and firebox |
| Level 2 inspection (camera) | $150 – $325 | Video scan of the full flue, especially after a chimney fire or a home sale |
| Third-degree creosote removal | $400 – $900+ | Hard, glazed creosote that resists standard brushing |
| Flue cap installation | $150 – $450 | Stainless or copper cap sized to the flue |
| Crown repair or rebuild | $300 – $1,200+ | Sealing cracks or rebuilding a failing crown |
| Relining (DuraFlex liner) | $2,500 – $6,500+ | Full flexible liner installation sized to the appliance |
| HeatShield flue resurfacing | $1,200 – $3,200+ | Ceramic resurfacing of a deteriorating liner wall |
What pushes a cleaning toward the top of the range is mostly condition, not square footage. A flue that’s been swept every year and burned with seasoned wood brushes out clean in under an hour. A flue that sat unused for several seasons, or one with heavy soot and a partial blockage from a nest, takes longer and needs more tooling. Third-degree creosote, the hard glazed kind that isn’t removable with a standard brush, moves the job into its own category and sometimes requires chemical treatment over more than one visit.
Access matters too. A chimney on a steep or high roof, or one with an offset in the flue, takes more setup than a straight run at an easy pitch. And if the sweep turns up a cracked crown or a liner that’s failing, that’s a separate repair line item, not a surprise tacked onto the cleaning bill.
What Affects Chimney Cleaning Pricing in Kensington
- Number of flues. A single-flue chimney is one sweep. A house with a fireplace flue plus a separate furnace or boiler flue is two, and each gets cleaned and inspected on its own.
- Fuel type. Wood-burning flues build creosote and soot and need the full rod-and-brush treatment. Gas fireplace vents carry far less solid residue, which is why they price lower.
- Creosote level. Light soot brushes out easily. Glazed, hardened creosote from burning green or unseasoned wood is a bigger job and can need chemical treatment and a follow-up visit.
- Chimney height and roof pitch. Taller chimneys and steeper roofs take more time to set up safely. That’s reflected in the estimate.
- Liners and flue condition. A cracked or deteriorating clay liner may call for a camera inspection or HeatShield flue resurfacing before the sweep is complete, adding to the total.
- What else the visit uncovers. A missing cap, a crumbling crown, or a damaged damper found during the sweep turns a cleaning into a cleaning-plus-repair, priced as a separate line.
If you want the full picture of what a sweep visit involves beyond the price tag, the chimney sweep Bensonhurst overview walks through each step. The core idea holds across every home: your chimney is a venting system, and a clean flue is what keeps smoke and carbon monoxide moving out of your living space instead of backing into it.
How to Save on Chimney Cleaning
There’s no trick to a lower cleaning bill, but a few habits genuinely keep the number down.
- Book before the cold season. Autumn fills the schedule fast. Scheduling in the warmer months means less pressure on timing and an easier appointment to fit.
- Burn seasoned wood. Wood dried for at least a season produces far less creosote, which means a quicker sweep and less chance of running into a Stage 3 removal charge.
- Keep the cap on. A cap keeps rain, birds, and squirrels out. A blocked flue from a nest is a bigger, more expensive cleaning job than a protected one.
- Pair the sweep with an inspection. When a technician is already on the roof for the cleaning, a Level 1 visual inspection comes at little or no extra cost. Catching a small crown crack early beats a rebuild later.
- Ask about the free estimate up front. Our estimates are free, so you know the range before anyone climbs the roof. Call (855) 924-3713 to set one up.
Do gas fireplaces cost less to clean than wood-burning ones in Kensington?
Yes. Gas fireplace cleaning in Kensington runs $99 to $175, while a wood-burning flue sweep costs $180 to $340, because gas vents produce little solid residue and need less heavy brushing. A gas appliance still needs its vent checked for blockage and its logs and glass cleaned, but the creosote battle doesn’t apply. Call (855) 924-3713 for an exact quote – estimates are free.
How often should you have a chimney cleaned in Kensington?
Once a year is the standard for a wood-burning chimney, and you should schedule it again any time you’ve burned more than a cord of wood or noticed a heavy buildup. Annual cleaning catches creosote before it hardens into the glazed stage, and it’s the cheapest way to keep the flue safe and working. If it’s been more than a year since your last sweep, call (855) 924-3713 and book an appointment.
What’s the difference between a chimney cleaning and a chimney inspection?
A cleaning removes soot and creosote from the flue; an inspection checks the condition of the flue, cap, crown, and firebox. In Kensington, a Level 1 inspection typically rides along with the cleaning at no separate charge, while a camera-based Level 2 inspection adds $150 to $325. If you’re buying a home or have had a chimney fire, the Level 2 is worth the extra. Call (855) 924-3713 to talk through which one your chimney needs.
Is it cheaper to repair my chimney or replace it?
In most Kensington cases, targeted repair is far cheaper than a full liner replacement. Flue resurfacing with HeatShield runs $1,200 to $3,200, a cracked crown is $300 to $1,200, and a new cap is $150 to $450, while a full DuraFlex liner installation starts around $2,500 and climbs to $6,500 or more for a tall, complex chimney. A camera inspection is what tells you which path you’re on. Call (855) 924-3713 for a written estimate – it’s free.
Can you clean my chimney the same day in Kensington?
Same-day cleaning is often possible when you call earlier in the day, and scheduling depends on the current workload. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. To find the soonest available cleaning, call (855) 924-3713 for a free estimate.
What does chimney cleaning involve beyond the price?
A standard sweep is a diagnostic as much as a cleaning. The technician protects the floor and surrounding area, then works the flue from the roof down (or up from the firebox depending on access), using rods and brushes sized to the flue. Soot and creosote come out, the firebox and smoke shelf get cleaned, and the technician checks the damper, the cap, and the visible parts of the liner along the way. That’s where most repair findings come from: a damper that no longer seals, a crown with a hairline crack, a liner flue with a rough patch. Catching them at cleaning time is the point of doing this every year.
Why trade-grade brands matter on a cleaning-and-repair visit
When a sweep visit turns into a repair, what gets installed matters for how long the fix lasts. We work with professional-grade components rather than hardware-store substitutes: DuraFlex for flexible relining, HeatShield for ceramic flue resurfacing, and Gelco, Olympia Chimney, Famco, and Copperfield for caps, crowns, and the smaller parts a chimney needs. HeatShield is a specialist-only method for restoring a deteriorating liner wall without pulling the whole thing out, and DuraFlex liners handle the demanding reline jobs that a basic sweep crew would refer out. Drawing from more than one supply line means we can match the component to your chimney’s actual configuration instead of forcing one brand’s answer onto every job.
When a cleaning turns into a repair: what Kensington homeowners should know
Most sweeps are just sweeps. But older masonry chimneys in this area often show their age during a cleaning: spalling brick, a crown that’s cracked and letting water in, a clay liner with gaps. Those aren’t reasons to panic; they’re reasons the visit includes a look. If a repair is needed, it’s quoted separately in writing, and you decide from there. The five service lines we cover – chimney sweeping, chimney inspection, chimney cap and crown work, chimney repair, and fireplace repair – mean most findings can be resolved through the same company rather than a referral. For related work beyond the cleaning itself, see our pages on chimney inspection and chimney repair.
Safety first: why creosote and blocked flues aren’t a DIY job
Creosote is highly flammable, and a flue packed with it is a chimney fire waiting for a hot ember. Cleaning a chimney from a roof, especially one at a steep pitch or above a second story, is genuinely dangerous, and a blocked or damaged flue can send carbon monoxide into a home. This isn’t work to attempt from a hardware-store brush and a ladder. A trained technician has the rods, the camera, and the fall protection to do it safely and to spot the kind of liner damage you can’t see from the firebox. If you’ve had a chimney fire, noticed a strong creosote smell, or seen smoke backing into the room, treat it as a priority and get it looked at.
Getting a written estimate in Kensington
Pricing a cleaning is simple once someone has seen the chimney: number of flues, fuel type, condition, and access. That’s the whole calculation. The written estimate makes it concrete, and there’s no charge for the visit that produces it. If you want a number before the season fills up, reach out. Call (855) 924-3713. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a free estimate, a clear range, and a plan for whatever the sweep turns up.
Written by the team at Chimney Sweep Bensonhurst.
Pricing reflects the Kensington market as of 2026. Chimney Sweep Bensonhurst offers free estimates – call (855) 924-3713.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Robert Reed"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Wade Fletcher"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Danielle Quinn