Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Borough Park
When your chimney starts showing its age, you need someone who knows exactly what they’re looking at. Borough Park’s housing is a mix of early-to-mid 20th-century brick and post-war construction, and the chimneys here have their own set of problems. We work with professional-grade materials like HeatShield and Gelco, and our technicians have up to 12 years of experience. Every job starts with a written estimate, so you know the price before we begin. Call (855) 924-3713 for a free estimate. We answer 24/7.
Why Borough Park Homeowners Call Chimney Sweep Bensonhurst for Chimney Repair
Word travels in a neighborhood like Borough Park. Homeowners here know when someone does good work and when they don’t. Our reputation in Borough Park is built on showing up, explaining what’s wrong in plain terms, and doing the repair right the first time so you don’t have to call anyone back.
Borough Park customers call us because we handle the whole chimney, from the crown down to the firebox. We don’t sweep and refer everything else out. Our technicians have up to 12 years of experience, and they’ve worked on every kind of chimney this borough has to offer, from older masonry stacks to prefabricated chases in post-war brick homes. We use HeatShield and Gelco because those products are made to last in this climate, and we won’t substitute hardware-store parts on a job that needs something better.
When you call, we’ll ask a few questions about your chimney and schedule a time that works. The estimate is free, and we won’t start anything until you’ve seen the written price. Call (855) 924-3713. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Borough Park
Chimneys here take a beating. New York’s freeze-thaw winters and humid summers stress older Borough Park brick stacks, and the heating season runs long enough that fireplace use overlaps with heavy boiler venting in the same chases. Here’s what we fix most often.
Chimney Waterproofing
Brick is porous. In Borough Park, where many homes are older masonry that’s been through decades of wet winters and humid summers, a waterproofing treatment is often the single most effective way to slow down deterioration. We apply a breathable water repellent that keeps rain out while letting the masonry dry from the inside. Without it, water seeps in, freezes, and pushes the brick face apart.

Flashing Repair
Flashing is the metal seal where the chimney meets the roof, and it’s the most common source of chimney leaks we find in Borough Park. When the flashing pulls away or the sealant dries out, water runs straight down into the chase or the ceiling below. We replace failed flashing with properly fitted metal and seal it correctly, so the joint stays watertight through freeze-thaw cycles.

Mortar Repointing
Mortar joints are the weak point in any brick chimney, and in Borough Park’s older two- and three-story brick homes, those joints have had more time to erode. Repointing means grinding out the old, crumbling mortar and packing in fresh mortar matched to the original. It restores the chimney’s structural integrity and stops water from getting behind the brick.

Spalling Brick Repair
Spalling is when the face of a brick flakes or pops off, usually after water has gotten in and frozen behind it. In Borough Park, we see it most on chimneys that haven’t been waterproofed. We replace the damaged bricks with matching units and address the underlying moisture problem so the new brick doesn’t go the same way.
Why Is Borough Park’s Repair Landscape Different? Factory-Built Fireplaces and Prefabricated Chases
Here’s something that sets Borough Park apart from many neighboring districts: this area’s post-war brick homes often contain factory-built fireplaces with prefabricated metal chases. Because these systems use manufacturer-specific parts, like Gelco or Olympia Chimney caps and dampers, a chimney that looks perfectly intact from the street can be hiding a discontinued component or a chase cover that no longer seals. This is a repair issue that rarely comes up in older, masonry-only districts, where the chimney is brick all the way up. In Borough Park, the assembly above your firebox may be steel, and steel fails differently than brick does.
Trusted Brands We Service in Borough Park
We work with HeatShield, Gelco, Olympia Chimney, and Famco because those are the names certified chimney specialists rely on. HeatShield’s ceramic flue-resurfacing system lets us restore a deteriorating liner wall without a full reliner replacement, which many basic sweep companies can’t offer. Gelco and Olympia Chimney supply caps, dampers, and chase components built for prefabricated systems. Famco covers the masonry side. We don’t stock parts, but we can source what your chimney needs and get it installed without a long wait. When you call chimney repair, you get a team that knows these brands and specifies the right one for your chimney’s configuration.
Common Chimney Repair Problems We See in Borough Park Homes
- UV-degraded prefabricated chase caps. On newer Borough Park homes, chase caps are often plastic or thin metal that breaks down under sun exposure. They crack, water gets into the chase, and the firebox rusts from the inside out. You usually don’t notice until staining shows up on an interior wall.
- Discontinued factory-built fireplace components. Factory-built fireplaces with manufacturer-specific dampers and liners may have parts that are no longer produced. That means a retrofit or rebuild, and it’s why we identify the manufacturer before quoting anything.
- Shared stacks in subdivided brick homes. A single flue or chase in a Borough Park two- or three-story brick building often serves multiple units. Repairing one flue can change draft for a boiler or water heater venting into the same stack, so we do a Level 2 inspection to check fire-separation and liner integrity before we touch anything.
- Cracked crowns and spalling mortar. Freeze-thaw winters crack masonry crowns and push mortar out of joints. It’s slow, then sudden: one season the crown looks fine, the next it’s spalling onto the roof.
See the difference
Before
After
Before
After
Before
AfterHow a Typical Chimney Repair Call Goes in Borough Park
Most calls start with something the homeowner noticed: water staining on the ceiling near a factory-built fireplace, or a draft that won’t pull even with a clean firebox. When we inspect, we often find a cracked prefabricated chimney cap or a failed chase cover gasket letting moisture into the chase and rusting the metal firebox components. We identify the manufacturer, whether that’s HeatShield, Copperfield, or another brand, then replace the cap and flashing with compatible parts, and verify the flue liner and damper for proper seal and draft. Nothing gets replaced without photo evidence you can see yourself. If a repair can safely wait, we’ll tell you.
Pricing for Chimney Repair in Borough Park, NY
We set every price per job with a written estimate, and the estimate is free. Here are typical ranges for the work we do most in Borough Park:
- Mortar repointing: typically $400 – $1,200, depending on how many joints and how high up
- Spalling brick repair: typically $350 – $900
- Chimney waterproofing: typically $250 – $600
- Flashing repair: typically $300 – $750
- Chimney crown rebuild: typically $500 – $1,500
- Chase cap replacement on a prefabricated system: typically $350 – $850
What moves the number is access, height, how much masonry is damaged, and whether the parts are standard or manufacturer-specific. A discontinued factory-built component can cost more than a standard masonry fix because it needs a retrofit. Nothing gets recommended without camera evidence you can review first.
We Also Serve Cities Near Borough Park
If you’re outside Borough Park, we also work in nearby communities like Sunset Park, Kensington, Dyker Heights, and Bensonhurst. If you’re searching for chimney repair in Borough Park or anywhere close by, the same team and the same standards apply. Call (855) 924-3713 to schedule an estimate.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Borough Park
Yes, you do. A factory-built fireplace from that era may have a chase cover, a cap, or internal components that are degrading even though the firebox looks fine. Those systems weren’t built to be maintenance-free; they need the same yearly look that a masonry chimney does. We check the chase, the cap, the liner, and the damper, and we show you what we find. Call (855) 924-3713 for an exact quote.
Water staining on the ceiling or walls near the fireplace is the most common sign. You might also see rust on the firebox, a draft that won’t pull, or visible cracks in the cap itself from the roof. Thin metal or plastic caps degrade under UV and lose their seal. We inspect the cap and flashing and replace with compatible parts. Call (855) 924-3713 and we’ll take a look.
Brick is porous, so it absorbs water every time it rains or snows, then freezes and cracks in a New York winter. Waterproofing is a breathable coating that keeps water out while letting the masonry dry. It slows down spalling and mortar erosion and is the least expensive way to extend the life of a masonry chimney. Call (855) 924-3713 for a free estimate.
A Level 2 inspection is a full inspection of the chimney, including the flue, the chase, the firebox, and the connections to appliances, often with a camera. It’s required any time a chimney changes use, when a property changes hands, or after a chimney fire, and it’s the inspection we run when a repair in a Borough Park shared stack could affect draft for a boiler or water heater venting into the same chase. Call (855) 924-3713 to schedule one.
Yes. A cracked crown lets water into the masonry below and is one of the most common failures we see on Borough Park row houses, where roofs are close together and access has to be planned. We rebuild the crown with a proper slope so water sheds, and we can waterproof the stack at the same time. Call (855) 924-3713 for an exact quote.
Ready to get your chimney looked at? Call (855) 924-3713 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Written by the team at Chimney Sweep Bensonhurst.