Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Borough Park, NY
We provide independent Gelco service across Borough Park, connecting homeowners with local chimney professionals who remove creosote, inspect Gelco liner systems, and repair or replace caps and top plates with parts that fit. What makes our Gelco work in Borough Park different is the housing itself: most jobs here are shared masonry stacks on two- and three-story brick walk-ups, not a single suburban flue. That changes the whole approach to cleaning and inspection.
Before anything gets booked, you get a flat-price sweep agreed on the phone, and the technician’s camera inspection and photo report are included. You see what we see.
Call (855) 924-3713. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Borough Park Residents Choose Us for Gelco Service
Our technicians have up to 12 years of experience, and a good share of that has been spent inside the older brick buildings that make up so much of Borough Park. On a Gelco flex liner or rigid stainless run, that time shows. We know where soot collects in a corrugated liner, where a tee joint tends to work loose, and what a top plate looks like after a run of freeze-thaw winters.
We’re an independent Gelco service provider. That means no dealer agreement and no manufacturer tie, just working familiarity with the product line from repeated teardown-and-relining work. When your liner is sound, we clean it and say so. When it isn’t, we recommend the parent componentry that actually fits it. The local pro doing the work is licensed and insured as their state requires, and every booking goes through on the flat price we quoted.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Borough Park
Here’s what our referrals run into most on Gelco systems in this part of Brooklyn, and why each one shows up here specifically.
- Corkscrewed creosote in a flex liner shared with boiler venting. The seams and corrugations of a Gelco flex liner pack with soot when wood smoke and appliance exhaust share one chase. That narrows the passage, and the fireplace starts to draft sluggishly. In a Borough Park walk-up, this happens faster than it would on a single-flue fireplace because two heat sources are feeding the same run.
- Loose joints and misaligned tees after an oil-to-gas conversion. Changing appliances can disturb a liner-to-appliance connector. When joints shift, flue gases have a path into a subdivided unit’s chase instead of up and out. We pull a camera through every connection to check.
- Corroded or displaced top plates and caps. New York’s freeze-thaw winters and humid summers take a toll on cap plates over old clay-lined stacks. Once water gets past a sagging plate, the masonry below starts to break down. Water intrusion is the quiet cause behind a lot of “mystery” chimney trouble in Borough Park.
- Undersized or uninsulated liners inside oversized cracked clay flues. A Gelco liner installed without insulation in a big old clay flue runs cold. Cold liners glaze creosote rather than letting it burn off cleanly, and glazed creosote is the stubborn, combustible kind.
- Spalling mortar behind a liner that still looks fine. The brick and mortar around a sound Gelco liner can fail on its own, especially on the sun-and-weather side of an older Borough Park stack. A liner is only as good as the chase holding it.
Gelco Service in Borough Park: What Local Conditions Mean for Your Equipment
The most useful thing a Borough Park homeowner can understand about their chimney is this: it’s probably doing more than one job. The brick two- and three-family walk-ups that define this area are often owner-occupied with a basement boiler room, so a single chase can carry a furnace, a water heater and an apartment fireplace at the same time. A Gelco liner in that stack has to be judged for every appliance tapped into it, not just the fireplace you light on a cold night.
Take a block like the stretches of 13th Avenue, where storefronts sit under subdivided flats above. The chimney serving that building isn’t one system, it’s a shared one, and a routine cleaning there means checking draft and fire-separation for the whole chase. In a suburban single-flue home, the same sweep is a much smaller question. In Borough Park, it isn’t.
Gelco Models & Products We Service in Borough Park
Our referrals work on the Gelco componentry you’ll actually find on a shared brick stack: Gelco Flex stainless flexible relining kits, Gelco rigid stainless chimney liner sections, Gelco top-plate and multi-flue cap assemblies, and Gelco liner-to-appliance connector and tee kits.
Where the existing liner is a Gelco system, we recommend Gelco-specific caps, top plates, tees and connectors. Fit and listed compatibility matter on a shared stack. Generic stainless hardware is fine for non-liner items like clamps and fasteners. That balance is how we keep the system working without over-selling parts. The technician photographs what’s found before anything is recommended.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Borough Park
Every Gelco service is priced per job by the written estimate, so the figure we quote is the figure you pay. What drives it is the layout: how many appliances share the chase, how accessible the cleanout is, whether the cap and top plate need replacing, and whether the liner needs re-securing or, in the worst case, re-lining. A straightforward sweep on a single flue sits well below the cost of a full reline, and we tell you plainly when work can safely wait. Nothing gets recommended without camera evidence you can look at yourself. The written estimate sets the final price, and the estimate itself is free.
Call (855) 924-3713 for your estimate. We answer 24/7.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Borough Park
No, a single-flue sweep isn’t enough on a shared stack. We run a Level 2 inspection on every appliance connection tapped into that chase, not just the fireplace, because draft and fire-separation problems show up at the appliance end too. Call (855) 924-3713 to book a full-stack inspection – the estimate is free.
The camera tells you. We send a scope down every flue and photograph what’s there, so you can see whether the liner is a Gelco flex or rigid system, whether the seams are sound, and whether it’s insulated and sized right. You don’t take our word for it; you look at the pictures. Call (855) 924-3713 to schedule.
Because the boiler is competing for the same flue. When the furnace fires in heating season, it pulls draft up the shared chase, and your fireplace loses its draw. That’s a sizing and separation question we solve during inspection, and fixing it now matters before creosote builds. Call (855) 924-3713 for an estimate.
Often, yes. A multi-flue cap keeps rain and debris out of every flue on a shared stack at once, which protects the older clay liners underneath. We’ll show you what the current cap looks like and whether a multi-flue replacement is warranted. Call (855) 924-3713 – estimates are free.
Yes. Conversions can leave connector joints loosened or misaligned, and that lets flue gases slip into a subdivided unit’s chase. A re-check confirms every connection is seated and drafting correctly. Call (855) 924-3713 to book it.
Service Areas Near Borough Park
We also connect homeowners to Gelco service in Bensonhurst, Gravesend, Dyker Heights and Midwood, and you can reach our Gelco work through Sunset Park and our Kensington page as well. Every one of these neighborhoods has its own housing character, and we adjust the approach to match. See how we handle Borough Park and Sunset Park jobs for the details.
Book Your Gelco Service in Borough Park Today
Whether your fireplace is smoking, your boiler is drafting poorly, or you just want the cap and top plate checked before the cold sets in, we can help. Call (855) 924-3713 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A flat-price sweep, a camera inspection with photos, and an honest answer on what can wait.
Written by the team at Chimney Sweep Bensonhurst.