Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Kensington, NY
We provide independent Gelco service across Kensington, NY, for the caps, dampers and liners that sit on top of this neighborhood’s older brick chimneys. The one thing that separates our Gelco work here from a routine sweep in a newer suburb: a cleaning in Kensington is often the first time anyone sees what decades of weather, coal-era construction and shared flues have done to the system, and we plan the visit around that. Our technicians have up to 12 years of experience with professional-grade components, including Gelco, and we treat every cleaning as a look at the whole venting system, not just the firebox. Call (855) 924-3713 to book a sweep and inspection. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Kensington Residents Choose Us for Gelco Service
Gelco chimney caps are common on Kensington roofs, and we know how they hold up in this climate. We work on Gelco products as an independent specialist, which means we diagnose what’s actually failing on your roof and flue rather than defaulting to a replacement quote. A cap that’s been on a slate roof through twenty freeze-thaw winters looks fine from the ground and may be loose at the fasteners up close. We check both.
Parts matter, and we specify them for fit and durability. Where an OEM Gelco component is available, we use it; for standard caps and dampers, a quality alternative that meets or exceeds the original specification does the job and keeps the installation precise. The goal on every Kensington chimney is a cap that seals, a damper that moves, and a liner that carries flue gases out of the house the way it should.
Scheduling is straightforward. You’ll get a flat-price sweep agreed before we book, a camera inspection, and a photo report so you can see what we see. Our Gelco service covers the five core jobs: sweep, inspection, cap and crown, chimney repair, and fireplace repair. One call handles the whole scope.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Kensington
Cleaning a Gelco-capped chimney in Kensington turns up a familiar set of problems. These are the five we run into most, and each one ties back to how these homes were built and how this climate treats them.
- Stainless steel liner seams corroding from freeze-thaw. Repeated cycles of wet and cold work on the seams where a Gelco stainless steel liner kit was joined. Once corrosion opens a seam, flue gases can leak into the chimney chase instead of going up and out. We check seam condition with a camera before we clean, not after.
- Multi-flue caps loosening or rusting at the fasteners. On Kensington’s older brick chimneys, a Gelco multi-flue cap can work loose at its fasteners after years of weather. Water gets in, and once it does, the clay tile liner beneath it starts to crack. A tightened or replaced fastener assembly is a small fix against an expensive liner repair.
- Top-mount dampers seizing after summer disuse. Gelco top-mount dampers sit closed through the humid summer, and soot plus moisture can lock them shut by fall. A damper that won’t open vents poorly and can push smoke back into the room. We free, test and adjust it as part of the sweep.
- Custom caps with improper flashing causing roof leaks. A Gelco custom chimney cap that isn’t sealed correctly at the flashing lets water track down the masonry. That shows up as spalling around the crown and damp staining inside the chimney. We check the flashing line and the crown together, since one failure often causes the other.
- Cross-contamination between flues on a shared stack. Kensington’s coal-era homes often have two or more flues inside a single stack, each capped under one Gelco unit. If one flue is compromised, exhaust can migrate into the other. Only a Level 2 camera inspection catches it, and a standard sweep won’t.
Gelco Service in Kensington: What Local Conditions Mean for Your Equipment
Here’s the local pattern that shapes every Gelco job we take on in Kensington. Many of these homes, built between 1900 and 1940, were originally heated by coal, and the chimneys were built with multiple flues serving a furnace and a kitchen stove. Those flues were later converted to oil and gas, and they still share a single stack today, often under one Gelco multi-flue cap. That arrangement is a maintenance problem no generic brand page will tell you about. When one flue corrodes or its cap seal fails, the shared stack lets exhaust cross into the flue that serves a different appliance. A standard sweep cleans the flue it can reach and never looks at the relationship between them. A Level 2 camera inspection does, and in Kensington that’s the difference between a clean chimney and a safe one. We recommend one before any Gelco cap goes back on the stack.
Gelco Models & Products We Service in Kensington
We service the kinds of Gelco products that end up on Kensington chimneys: multi-flue caps and custom chimney caps, top-mount dampers, and stainless steel liner kit components. Cap work is a large part of what we do here, and so is waterproofing the masonry around it, since a cap that seals well still can’t stop water that’s already in the brick.
We’re an independent shop, not a manufacturer-authorized agent, so our choices come from what fits your chimney rather than what a single product line offers. Where a standard Gelco cap fits, we install it. Where the crown and flashing need repair first, we handle that before the cap goes on, using HeatShield flue-resurfacing where the liner wall is deteriorating but a full reline can wait. DuraFlex flexible liner systems cover the full reline when it can’t.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Kensington
Gelco service pricing in Kensington depends on what the chimney needs and how far the work goes. A cleaning and inspection is one job; cap repair, flashing, crown work and liner decisions are separate. Below are the typical estimated ranges for the kind of work Gelco owners here ask about. The written estimate after our visit sets the final price.
| Service | Typical estimated range |
|---|---|
| Chimney sweep with camera inspection and photo report | $180 – $340 |
| Level 2 camera inspection of shared multi-flue stacks | $150 – $300 |
| Gelco multi-flue or custom cap repair and reset | $150 – $350 |
| Gelco top-mount damper free-up or replacement | $200 – $450 |
| Chimney waterproofing | $300 – $600 |
What drives the cost is access to the flues, whether the cap fasteners are seized, how many flues share the stack, and whether camera work shows spalling or a compromised liner. A free estimate includes a look at the cap, the crown, the flashing and the flue interior, and we tell you plainly when a repair can safely wait. Call (855) 924-3713 for an exact quote.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Kensington
Look for rust streaks at the fasteners, a cap you can shift by hand, or water staining inside the chimney. In Kensington, freeze-thaw cycles loosen cap fasteners faster than in milder climates, and a loose cap lets water reach the clay tile liner. We check the cap and its flashing on every sweep. If it’s only the fasteners, we can often reset it; if the cap itself is failing, we’ll show you the photo evidence. Call (855) 924-3713 for an exact quote.
It usually can be repaired. Most seized Gelco top-mount dampers fail from soot and moisture locking the mechanism after a summer closed against humid air, and freeing, cleaning and adjusting the moving parts restores full operation. Replacement is only needed when the linkage or housing is physically broken. A qualified technician can tell the difference quickly during a sweep and won’t push replacement when a repair holds.
Because Kensington’s coal-era homes often have multiple flues sharing one stack under a single Gelco cap, and a basic sweep can’t see cross-contamination between them. A Level 2 camera inspection runs the full flue interior and confirms each flue vents safely and separately. Without it, an exhaust leak from one flue into another goes undetected. We include camera footage and a photo report so you can see the result yourself.
A properly installed Gelco stainless steel liner that’s kept dry and inspected will typically last decades. What shortens its life in Kensington is water intrusion, not flue gases. A failed cap or bad flashing lets moisture reach the liner, and the seams corrode, especially with freeze-thaw working them open. Keeping the cap sealed and the masonry waterproofed does more to extend liner life than anything else. Call (855) 924-3713 to have your liner checked.
Yes, a good cap and waterproofing do different jobs and you need both. A Gelco cap stops water from entering the flue from the top; waterproofing protects the brick and mortar from driving rain and freeze-thaw. In Kensington’s humid summers and cold winters, brick that stays wet starts to spall, and once the masonry fails, cap integrity goes with it. A waterproofing treatment after the cap is sealed keeps both working. Call (855) 924-3713 for a free estimate.
Service Areas Near Kensington
We service Gelco chimney work in Kensington and the communities around it, including Bensonhurst, Gravesend, Dyker Heights, Midwood, Borough Park and Coney Island. If you’re outside those neighborhoods, call and we’ll confirm coverage before we book. You can also read more about our Kensington service, or see our pages for Flatbush and Borough Park.
Book Your Gelco Service in Kensington Today
Whether you need a sweep, a cap reset, a damper freed or a liner assessed, we’ll book your Gelco service in Kensington, NY with a flat-price sweep agreed before we arrive and a free estimate for any repair. Call (855) 924-3713 to schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bensonhurst.