Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Kensington
If your fireplace is smoking into the room, the damper won’t seat, or a gas unit won’t hold a pilot flame, call Chimney Sweep Bensonhurst at (855) 924-3713. We handle fireplace repair across Kensington, from the blocks near Ocean Parkway to the two-family houses off Church Avenue, and we know what these older hearths are up against. Kensington’s housing stock was mostly built between 1900 and 1940, and a lot of these chimneys were designed for coal long before anyone thought about a gas insert. That history matters when something goes wrong. We answer 24/7, with fast dispatch from 7am to 7pm. A written estimate is set per job and agreed before any work begins.
Why Kensington Homeowners Call Chimney Sweep Bensonhurst for Fireplace Repair
Fireplace repair in Kensington is a venting-diagnosis job before it’s a repair job, and we treat it that way. The neighborhood is full of detached and semi-detached single- and two-family houses with brick exteriors, slate or asphalt roofs, and original masonry chimneys lined in clay tile. Many of those chimneys have been retrofitted over the decades, but plenty still lack a modern stainless liner. We go in with a camera first and show you the footage before we recommend anything.
What sets us apart is scope. We handle five core service lines – chimney sweeping, chimney inspection, cap and crown work, chimney repair, and fireplace repair – so a problem that starts at the firebox and ends at the crown can be resolved through one company. Our technicians have up to 12 years of experience, and they work with professional-grade brands like DuraFlex, HeatShield, and Copperfield rather than hardware-store substitutes.
Reviews from Kensington customers aren’t something we’ll put a number on here, but the pattern is consistent: homeowners want to see the evidence, understand why a repair is being recommended, and know that work which can safely wait will be told to wait. We serve Kensington and the surrounding blocks with that same approach on every call.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Kensington
Damper Repair in Kensington
A damper that no longer seats is one of the most common causes of smoke spilling into a Kensington living room. In a house built in the 1920s or 1930s, the damper has had decades of heat cycling, and the pivot or frame often warps or rusts shut. We reseat or rebuild the damper so the fireplace drafts correctly and the flue can be closed when the hearth is cold.
Firebox Repair in Kensington
Firebox mortar joints in older Kensington homes crack from repeated heating and cooling, and the humid summers followed by chilly winters push freeze-thaw cycles through the masonry. We repair firebox brick and mortar with heat-rated materials. If a crack is severe enough that the firebox structure is compromised, we’ll show you the footage and explain what’s safe to burn until the repair is done.
Wood Burning Fireplace Repair in Kensington
Smoke rolling into the room is the call we hear most in Kensington, and the cause is often a smoke chamber furred with glazed creosote that a brush alone won’t clear. We camera-inspect the flue, clear what’s actually causing the restriction, and repair the firebox and damper as needed. Where the clay tile is genuinely compromised, we may recommend a HeatShield ceramic resurfacing or a DuraFlex stainless liner.
Fireplace Insert Service in Kensington
Insert retrofits in Kensington’s older homes often vent into a flue that was never designed for the appliance now sitting in it. We inspect the insert connection, check the liner, and confirm the venting is correct for the unit. Where a liner is missing or undersized, we can install a properly matched system using professional-grade components.
What Actually Happens on a Kensington Fireplace Repair Call
Here’s the part of the job that matters most in Kensington. The neighborhood’s early-1900s two-family houses were built with multiple flues stacked in one masonry chimney – one for the coal furnace, one for the kitchen range. So a fireplace repair here often means sorting out which flue vents what before anyone touches the firebox. That multi-flue condition is a legacy of coal-fired heating, and newer suburban construction rarely presents it.
In a typical Kensington call, a homeowner lights a wood fire and gets smoke spilling into the room instead of up the stack. The usual cause is a damper that no longer seats, or a smoke chamber choked with glazed creosote, sometimes compounded by a clay-tile flue that has spalled and is pulling air from an adjacent appliance flue in the same stack. A qualified pro starts with a camera inspection of every flue in the chimney, then rebuilds or reseats the damper, repairs the firebox mortar, and only recommends a liner when the footage shows the tile is genuinely compromised. That’s how we work: no repair gets sold without camera evidence you can watch yourself, and we’ll say plainly when something can safely wait.
Cross-contamination between two flues sharing one stack is the failure mode that catches people off guard. The fireplace and the furnace fight for draft, and one appliance can pull exhaust from the other. A careful inspection of each flue in the stack is the only way to know what’s venting where.
Trusted Brands We Service in Kensington
We work with professional-grade, industry-recognized brands on Kensington fireplace repairs: HeatShield ceramic flue-resurfacing systems for deteriorating liner walls, DuraFlex flexible liner systems for relining, and Copperfield and Gelco components where they fit the chimney’s specific configuration. We don’t stock parts locally – we specify the right component to match each chimney, then order it. Many basic sweep companies aren’t equipped for HeatShield resurfacing or DuraFlex relining at all; those are specialist methods that take the right training and the right materials. We specify DuraFlex because a properly sized stainless liner is what makes an older flue safe to use again.
Common Fireplace Repair Problems We See in Kensington Homes
- Smoke rolling into the room. A damper that no longer seats or a smoke chamber choked with second- and third-degree creosote will send smoke into the living room even on a cold flue. A brush alone won’t clear glazed creosote.
- Spalling clay-tile liner hidden behind an intact-looking firebox. The firebox can look fine while the tile behind it is cracked and spalling. Camera footage of the flue is how you find it before it becomes a bigger problem.
- Cross-contamination between two flues sharing one stack. Old coal-era chimneys in Kensington often have two flues in one stack, and the fireplace and furnace can fight for draft when one is compromised.
- Freeze-thaw cracking in older masonry. Kensington’s chilly winters push moisture through the brick and crack mortar joints around the firebox and crown. The heating season runs from November to March, so fall is the right time to inspect before heavy use.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Kensington, NY
Fireplace repair in Kensington is priced per job, and the written estimate you receive sets the final price. Typical ranges for this market:
| Service | Typical Estimated Range |
|---|---|
| Damper repair or reseating | $180 – $400 |
| Firebox mortar and brick repair | $250 – $700 |
| Smoke chamber cleaning and repair | $300 – $650 |
| Insert inspection and connection service | $200 – $500 |
| HeatShield ceramic flue resurfacing | $1,200 – $2,800 |
| DuraFlex stainless liner installation | $1,800 – $4,500 |
What moves the number: how many flues are in the stack, whether the damper is repairable or has to be replaced, the condition of the firebox, and whether a liner is needed. We give a free estimate, and nothing is recommended without camera footage you can see for yourself.
We Also Serve Cities Near Kensington
Along with our work in Kensington, we serve homeowners in Flatbush, Borough Park, Midwood, and Sunset Park. The housing stock across these neighborhoods shares the same early-20th-century masonry and coal-era chimney lineage, so the approach carries over. If you’re just outside Kensington, call and we’ll confirm coverage for your block. Our fireplace repair team covers the full scope across the area.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Kensington
A camera inspection of every flue in the stack is the only reliable way to tell. We run the camera down each flue, trace which appliance connects where, and show you the footage before any repair is recommended. Many Kensington chimneys have a flue for the furnace and a separate one for the fireplace or range, and misidentifying them is how smoke problems start.
Call (855) 924-3713 for a free estimate and a camera walk-through.
Because a sweep only clears what a brush can reach, and glazed creosote in the smoke chamber won’t come off with a brush. A damper that doesn’t seat properly is the other common cause. Either way, the fix starts with looking at the actual condition of the smoke chamber and damper, not just the flue above them.
Call (855) 924-3713 – estimates are free.
Not always. A hairline crack in firebox mortar can often wait while you save for the repair, but a crack that runs through the brick itself can let heat and gases past the firebox, and that’s a safety issue. We’ll show you the extent on camera and tell you plainly whether it can wait or shouldn’t.
Call (855) 924-3713 for a free estimate.
The original clay tile can stay if the camera footage shows it’s sound and correctly sized for the appliance venting into it. A liner is recommended when the tile is spalled, cracked, or undersized, or when an insert or furnace is venting into a flue never built for it. HeatShield resurfacing is often the right middle path when the tile is deteriorated but not fully failed.
Call (855) 924-3713 – we’ll show you the footage and let the evidence make the case.
Once a year, ideally in the fall before the November-to-March heating season starts. Older Kensington chimneys take a lot of freeze-thaw punishment, so an annual inspection catches spalling tile and cracked mortar before they turn into a bigger repair. If you burn wood regularly, don’t skip a year.
Call (855) 924-3713 for a free estimate.
What Happens When You Call
Call (855) 924-3713 and we’ll book a fireplace repair visit for your Kensington home. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Every visit starts with a camera inspection of the flue and firebox, the footage is yours to watch, and the written estimate sets the price before any work begins. Estimates are free. Whether it’s a damper that won’t seat, a smoking firebox, or a two-flue stack that needs sorting out, we’ll diagnose it, show you what we found, and repair it safely – or tell you when it can wait.
Written by the team at Chimney Sweep Bensonhurst.