Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Kensington, NY
If you’re searching for DuraFlex chimney cleaning in Kensington, here’s the short answer: we’re an independent chimney specialist that cleans, inspects, and repairs DuraFlex flexible stainless liner systems in Kensington’s older homes, and we’re not affiliated with the manufacturer. What makes our DuraFlex work here different is the housing stock itself. Most of the chimneys we open up in Kensington sit in 1900-to-1940 brick houses with shared multi-flue stacks, and a DuraFlex liner in one flue doesn’t vent on its own. Call (855) 924-3713. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Kensington Residents Choose Us for DuraFlex Service
DuraFlex is a flexible stainless steel chimney liner, and in Kensington’s pre-war brick chimneys it shows up in a lot of the retrofits we come across. That matters to us because a liner system is only as good as the flue it sits in. We’ve worked on DuraFlex Pro stainless flex liners, DuraFlex Lite flexible liners, DuraFlex Insulated liner kits, and DuraFlex Multi-Flue Caps across the neighborhood, and we know how each one behaves when the chimney around it is older and rougher than the liner.
We specify professional-grade components because the right gauge, insulation wrap, and cap size keep draft and venting where they belong. A mismatched part can throw off both. We’re an independent shop, so we diagnose your system on its own evidence, not a manufacturer’s checklist. Scheduling is straightforward: call, describe what you’re seeing, and we book the visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Kensington
Most of the DuraFlex problems we find in Kensington fall into a handful of patterns. Here are the ones that come up again and again.
- Corrosion pitting on the stainless flex liner. In older Kensington chimneys venting oil or gas appliances without an insulation wrap, flue gases condense against the cool liner wall, especially through humid summers. That condensation pits the stainless over time. We clean the liner, then inspect the interior with a camera before calling it sound.
- Cap damage letting water in. A missing or deteriorated DuraFlex cap lets rain and snow straight into the flue. The top few feet of the liner take the worst of it, and that’s exactly where Kensington’s freeze-thaw cycles hit hardest. We check the cap as part of every cleaning visit.
- Liner distortion or joint separation. When a DuraFlex system was installed into a chimney whose clay tiles had already begun spalling, the flex liner isn’t held evenly inside the flue. It can distort or pull apart at the joints. A Level 2 camera inspection tells us whether that’s happening.
- Creosote and soot buildup on wood-burning liners. Kensington’s two-family houses often burn hard from November through March. Soot and creosote collect on the liner walls, draft drops, and fire risk climbs if the annual sweep gets skipped.
- Overlooked flues in a shared stack. Many Kensington chimneys run multiple flues up a single brick stack. Cleaning one DuraFlex-lined flue without checking its neighbors can leave an appliance venting poorly or cross-venting into the wrong passage.
DuraFlex Service in Kensington: What Local Conditions Mean for Your Equipment
The single fact that shapes most of our DuraFlex work in Kensington is the shared brick stack. Many chimneys here still run multiple flues up one stack, a holdover from coal-fired furnaces and kitchen stoves. When someone retrofits a DuraFlex liner into one of those flues, the new liner changes the pressure and draft dynamics for every other flue in the same stack. In a typical Kensington two-family with a DuraFlex liner in an old clay-tile flue, the homeowner calls in fall because smoke is backing up or the fireplace is slow to draw. A qualified sweep usually finds the liner itself is sound, but the shared stack above it has spalled mortar or a failed cap. The fix is repointing or a new multi-flue cap, plus a Level 2 camera inspection to confirm the adjacent appliance flue isn’t cross-venting. If the DuraFlex liner is pitted from years of condensation, replacement with an insulated liner is the honest recommendation before the heating season starts. That’s the difference between cleaning a liner and understanding the chimney it lives in.
DuraFlex Models & Products We Service in Kensington
We service DuraFlex Pro stainless flex liners, DuraFlex Lite flexible liners, DuraFlex Insulated liner kits, and DuraFlex Multi-Flue Caps in Kensington. The cleaning and inspection side of the work is the same on all of them: brush the liner, pull a camera through, read the footage. What changes is how we choose replacement parts when something needs attention. We match parts to the liner’s actual diameter, gauge, and cap footprint rather than substituting whatever’s closest on the shelf. The insulation wrap matters too, particularly in Kensington chimneys that vent gas or oil, where an unwrapped liner runs cooler and collects condensation.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Kensington
The price is set per job by the written estimate, and the estimate is free. What drives the number is real: the height and configuration of the flue, whether the chimney has a shared stack that needs camera inspection, the state of the cap, and whether the liner is pitted or sound. A cleaning and Level 2 inspection on a straightforward DuraFlex liner is one job. Catching a separated joint or a failed cap adds scope. We walk you through what we find on camera before anyone recommends a repair, and we tell you plainly when a fix can wait. We also handle chimney waterproofing and cap replacement, which is where a lot of DuraFlex damage starts. For an exact quote, call (855) 924-3713. The price you’re quoted is the price you pay.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Kensington
Yes, it matters a great deal. A liner run into one flue of a shared stack changes draft for the appliance venting through the other flue, and old coal-era stacks often have spalled mortar between the passages. A Level 2 camera inspection of the whole stack is the only way to confirm each flue vents safely on its own. Call (855) 924-3713 to book one.
You can’t tell from the firebox alone. Freeze-thaw damage shows up at the top of the flue and in the cap area, where water gets in and rusts the stainless. The internal camera on a Level 2 inspection is what reveals pitting or joint separation. If you’ve noticed a draft change or water staining, call (855) 924-3713.
Usually yes. An insulated liner keeps flue gases warmer so they don’t condense on the stainless wall, which is the main corrosion mechanism in gas and oil conversions. In a 1930s Kensington brick chimney that was built for coal and retrofitted multiple times, the insulation wrap buys real years of liner life. Call (855) 924-3713 for an assessment.
A Level 2 inspection covers the full flue interior by camera, the cap, the crown, the joints between flue sections, and, in a shared Kensington stack, the adjacent appliance flue. It’s the inspection that tells you whether the liner is sound or compromised. We hand you the footage so you can see what we see. Call (855) 924-3713 for an exact quote on the inspection.
It can, and we’ve seen it. Without a cap, rain and snow run straight down the liner, and the top few feet take direct freeze-thaw cycling all winter. That’s where rust and pitting show up first. A DuraFlex Multi-Flue Cap is a straightforward fix that protects the liner you already have. Call (855) 924-3713 to have your cap checked.
One more that comes up often: what a DuraFlex cleaning actually costs in Kensington. The exact figure depends on flue height, stack configuration, and whether the inspection turns up a repair, so the written estimate is what sets it. Call (855) 924-3713 – estimates are free.
Service Areas Near Kensington
We also take DuraFlex service calls in Flatbush, Borough Park, Bensonhurst, Gravesend, Dyker Heights, and Midwood. If you’re just outside those, call and we’ll confirm whether we cover your address before booking. Kensington is our home base for this work.
Book Your DuraFlex Service in Kensington Today
Whether you need a routine sweep, a Level 2 inspection, chimney waterproofing, or a cap replacement, call (855) 924-3713 to schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the final price.
Written by the team at Chimney Sweep Bensonhurst.