Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Midwood, NY
We provide independent Gelco service across Midwood, and the one thing that makes our Gelco work here different is the party-wall stack. Most chimney companies check your flue and leave. In Midwood’s attached brick rows, a Gelco cap or liner failure on your side of the wall can push smoke and carbon monoxide into the house next door, so we inspect both sides of the stack and photograph the joints where the two roofs meet. We’re an independent Gelco service provider, not authorized, sponsored or endorsed by Gelco, and we say so plainly.
From a proper sweep and a Level 2 inspection through cap replacement, liner work and waterproofing, one call covers the whole venting system. Call (855) 924-3713. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Midwood Residents Choose Us for Gelco Service
Gelco stainless flexible liner kits, multi-flue and single-flue caps, top-sealing damper assemblies and liner-to-appliance connectors sit in a lot of Midwood chimneys. That’s a specific set of components, and season after season we’ve learned how they actually age in a damp coastal stack: where the joints start to show surface corrosion, which clamp bands loosen first, how a gasket behaves by its second or third winter. That familiarity is the reason homeowners keep calling back.
Parts are matched to the flue size and the appliance, so a replacement cap or connector is the exact-spec part rather than whatever a hardware aisle happens to stock. We book a specific window, agree the scope before anyone starts, and give you a free written estimate before work begins. If the evidence says the job can safely wait until spring, we tell you that instead.
Our technicians have up to 12 years of experience, and the local pro we connect you with is licensed and insured as their state requires. Serving Midwood means working the same attached-street reality every visit. If you want the deeper Gelco background, our Gelco service page covers the equipment in detail.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Midwood
These are the failures we run into most often on Gelco equipment in Midwood’s housing stock, and each one has a local cause behind it.
- Wet-out and joint corrosion on insulated liners. An insulated Gelco liner dropped into an original clay-tile stack often sits tight against mortar that’s already crumbling. Midwood’s humid summers and damp winters push moisture into that gap, the outer wrap wets out, and the stainless starts to corrode at the joints. Left alone, it goes from cosmetic to structural faster than most owners expect.
- Cap damage from Nor’easter wind and salt air. Roof stacks catch the full force of coastal weather. Screens tear, clamp bands loosen, and a Gelco cap can lift just enough to send rain straight down the flue. On a party-wall stack the same wind load hits the neighbor’s side too.
- Hardened top-sealing damper gaskets. The gasket on a Gelco top-sealing damper hardens and stops sealing within a few seasons. The fireplace then drafts cold air, and creosote in the liner stays damp instead of drying out. Replace the gasket and the draft problem usually goes with it.
- Backdraft across a shared stack. When a Gelco liner terminates at the same height as the adjoining flue, a compromised crown or cap on either side can push smoke and carbon monoxide into the neighboring house. It’s why we document the shared mortar joints, not just your termination.
- Creosote glaze from heavy winter use. Fireplaces and wood-burning inserts here get worked harder than most of Brooklyn, so glaze builds on the Gelco liner. A proper sweep clears it. A camera inspection shows you what was actually there.
Gelco Service in Midwood: What Local Conditions Mean for Your Equipment
The fact that shapes every Gelco job here is the party wall. Midwood’s dense rows of semi-detached and fully attached brick houses often share one stack between two households, and that changes the stakes. A cracked flue liner or a missing crown on one side can leak smoke and carbon monoxide into the adjoining home. So we inspect the neighbor’s side of the stack, photograph the mortar joints where the two roofs meet, and put both in the report. That documentation matters just as much for a family on a quiet Midwood block heating with a masonry fireplace through the winter as it does for a walk-up building on a busier corner.
Coastal Brooklyn’s damp winters and humid summers also push moisture into unlined or un-capped brick, so freeze-thaw spalling of mortar crowns and interior flue deterioration are the failures we see most. Salt-laden air and Nor’easter wind speed up crown and flashing decay on exposed roof stacks. A Gelco cap that’s slightly loose becomes a water entry point after the first hard storm of the season.
Gelco Models & Products We Service in Midwood
We service the Gelco equipment that actually shows up on Midwood roofs: stainless flexible liner kits, both single-wall and insulated; single-flue and multi-flue stainless caps; top-sealing damper assemblies; and the liner-to-appliance connector and tee kits used with fireplace inserts. Each job starts with measuring the flue and identifying the appliance, because a cap or connector has to match the opening and the vent it serves.
Where the existing Gelco liner is sound but a cap, gasket or connector is failing, we repair that component with a part matched to the size and spec. Where the liner itself is perforated or the clay tiles around it are spalling, relining is the honest recommendation. We’re clear about which situation you’re in, and the camera evidence backs it up.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Midwood
Every price is per job, set by a free written estimate after we’ve seen the chimney. Nothing is added afterward without your agreement. Here’s how the ranges typically break down:
| Service | Typical Estimated Range |
|---|---|
| Standard chimney sweep with Level 1 inspection | $150 – $300 |
| Level 2 inspection (camera, photo report) | $250 – $500 |
| Gelco cap replacement (single-flue) | $250 – $600 |
| Top-sealing damper gasket replacement | $150 – $350 |
| Chimney waterproofing | $300 – $800 |
| Gelco liner relining | $1,800 – $4,500 |
Cost moves with flue height and access, whether it’s a shared party-wall stack, and the condition of the crown and flashing. A free estimate includes the camera inspection and a photo report you keep. Call (855) 924-3713 for an exact quote.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Midwood
Yes. On a shared party-wall stack, a cracked liner, a lifted cap or a compromised crown on your side can push smoke and carbon monoxide into the adjoining house. That’s why we inspect and photograph the neighbor’s side and the mortar joints where the roofs meet, then put both in the written report so neither household is guessing. Call (855) 924-3713 to book an inspection.
Usually not. A 1930s attached brick house with a Gelco liner set into original clay tiles needs a Level 2 inspection with a camera, because the condition of the liner, the mortar and the shared stack can’t be seen from the firebox alone. A Level 1 makes sense once a Level 2 has established the baseline and the system is sound. Call (855) 924-3713 and we’ll tell you which you actually need.
The gasket hardens. Heat cycles and damp air stiffen it until it stops meeting the sealing surface, so the fireplace drafts cold air and creosote in the liner stays wet instead of drying. Replacing the gasket restores the seal and the draft. Call (855) 924-3713 for a quote on the gasket replacement.
It does. Salt-laden air corrodes the metal faster, and Nor’easter gusts work the clamp bands and screens loose, so a cap that lifts slightly lets rain straight down the flue. Periodic checks after storm season catch it while it’s still a cheap fix. Call (855) 924-3713 to have your cap checked.
It’s real work when the brick is absorbing water. Midwood’s damp winters and humid summers drive moisture into un-capped and unlined brick, and freeze-thaw spalling of the mortar crown is the damage that follows. Waterproofing slows that decay and protects the Gelco liner behind it. We recommend it when the camera and a visual check show water damage, and we say when it can wait. Call (855) 924-3713 for a free estimate.
Service Areas Near Midwood
Alongside Midwood, we serve homeowners in Bensonhurst, Gravesend, Dyker Heights, Borough Park and Coney Island. The attached-row and party-wall reality repeats across these neighborhoods, so our inspection routine carries over. Gelco liner and cap work in Flatlands and Kensington follows the same method.
Book Your Gelco Service in Midwood Today
Whether it’s a sweep, a Level 2 inspection, a cap replacement, chimney waterproofing or a full Gelco relining, we’ll give you a free written estimate and show you the camera evidence before you commit. Call (855) 924-3713. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bensonhurst.