Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Kensington
A missing or failed cap and a cracked crown are the two fastest ways water gets into a Kensington chimney, and both are usually fixable before the flue is damaged. We connect Kensington homeowners with independent local chimney professionals who inspect the stack with a camera, show you what they find, and price the cap or crown work in writing before anyone touches the masonry. Kensington is full of 1900 – 1940 brick houses, and those chimneys need more careful treatment than a generic cover snapped over the top. Call (855) 924-3713 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 12 years of experience.
Why Kensington Homeowners Call Chimney Sweep Bensonhurst for Chimney Cap & Crown
Kensington’s chimney stock is its own animal. The neighborhood is mostly detached and semi-detached single-family and two-family houses built between 1900 and 1940, brick exteriors, slate or asphalt roofs, and original masonry chimneys with clay tile liners. A good number of those chimneys were built for a coal furnace and a kitchen stove, then converted to oil and gas over the decades, and many still have no modern stainless liner at all. That history shapes every cap and crown decision we help with in Kensington.
We built this page around that reality rather than a generic pitch. The local pro we connect you with runs a Level 2 camera inspection first and shows you the footage per flue before recommending a cap, a crown repair, or a liner. That matters here because Kensington’s humid subtropical climate, with hot muggy summers and chilly winters, drives freeze-thaw cycles that crack masonry and speed up deterioration on older stacks. The heating season runs November to March, so fall is the busiest stretch for cleaning and inspection before heavy use, and a failing crown found in October is a lot cheaper to deal with than a spalled liner found in January.
We’re honest about scope. Chimney Sweep Bensonhurst connects Kensington homeowners with vetted local professionals; the pro who shows up is licensed and insured as their state requires. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Kensington
Our chimney cap & crown work in Kensington covers the full range of what these older stacks actually need. Crown Repair, Multi-Flue Cap, and Crown Coating are the three we do most here, alongside straight cap installation and replacement.
Cap Installation
A correctly sized stainless cap keeps rain, squirrels, and birds out of the flue while letting smoke escape. On a Kensington one-flue brick chimney, installation is usually straightforward. The size and the anchoring are what matter, because a cap that sits loose on a cracked crown just funnels water straight down the stack.

Cap Replacement
Corroded galvanized caps are everywhere on Kensington roofs. They outlive their coating, the screen rusts through, and the cap starts pulling away from the masonry at the crown edge. Replacing that with a stainless or copper unit, and re-sealing the flashing where it meets the crown, is the fix. Left alone, the gap lets water track down the stack and erode mortar joints.

Crown Repair
The crown is the concrete slab on top of the chimney, and it’s supposed to shed water away from the flue. Original crowns on 1900 – 1940 Kensington chimneys are thin and often don’t overhang the brick, so they crack along the mortar joints at the bond. A proper repair rebuilds the crown with an overhanging pour so meltwater runs off the sides instead of sitting on top and seeping into the clay tile liner.

Crown Coating
When the crown is sound but surface-cracked, a flexible coating can seal it without a full rebuild. We specify Gelco elastomeric crown coating because it moves with the masonry through Kensington’s freeze-thaw swings instead of cracking again from a rigid patch. Coating is the right call on a crown that still has its structure; a crown that’s cracked through the slab needs rebuilding, and the camera and photos will show you which one you have.
Trusted Brands We Service in Kensington
We work with professional-grade components, not hardware-store substitutes. That means Olympia Chimney stainless multi-flue caps built to cover each flue opening on a shared stack, Gelco coatings for crown sealing, and HeatShield ceramic flue-resurfacing systems when a cleaning reveals a deteriorating liner wall that a coating can’t fix. Famco and Copperfield round out the supply lines. All of these are specified for the chimney’s actual configuration rather than defaulting to one-size-fits-all parts. We don’t claim parts are stocked on a truck; the local pro measures, specifies the right component, and returns with it. Call (855) 924-3713 for a free estimate.
Common Chimney Cap & Crown Problems We See in Kensington Homes
The failure modes here repeat because the housing stock repeats. Here’s what turns up most often on these older Kensington roofs:
- Cracked crowns at the bond. Original thin concrete crowns on 1900 – 1940 chimneys crack where they meet the brick, and meltwater runs down into the flue, accelerating spalling of the clay tile liner. A coating can hold a sound crown; a cracked-through slab needs rebuilding with an overhang.
- One cap over a multi-flue stack. A single-flue cap mounted over a stack with two or more flues leaves the second opening uncovered. Rain and animals get into the unused coal-era flue, and cross-contamination between appliances venting into the same stack resumes.
- Corroded caps and failed flashing. Galvanized caps that have outlived their coating pull away from the masonry, opening a gap at the crown edge where water tracks down the stack and erodes mortar joints.
- Appliances vented into stacks never designed for them. Kensington’s coal-era chimneys had multiple flues for a furnace and a kitchen stove; retrofits over the decades sometimes vented modern appliances into flues with the wrong size or no liner. Camera inspection per flue is the only way to confirm what’s actually venting where.
Take a typical 1920s Kensington brick chimney. The crown has cracked along the mortar joints, the cap screen has rusted through, and rain and squirrels have been getting into a clay-tile flue that already shows spalling. The usual cause is years of freeze-thaw cycling on a thin, non-overhanging concrete crown plus a galvanized cap that outlived its coating. A qualified local pro runs a Level 2 camera inspection first, then rebuilds or coats the crown with an overhanging pour and fits a correctly sized multi-flue stainless cap over each flue opening. That sequence, evidence first and parts second, is the difference between a real repair and a guess.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Kensington, NY
A typical single-flue stainless cap installation in Kensington runs $250 – $475, and a custom-fabricated cap for an odd-size opening runs $400 – $800. Crown coating with an elastomeric system runs $350 – $650. Rebuilding a cracked crown with an overhanging pour runs $600 – $1,200, and a multi-flue stainless cap over a shared stack runs $550 – $1,100 depending on the number of openings. What moves the number: the number of flues in the stack (common in these two-family houses), whether the crown is coated or rebuilt, and whether flashing needs re-sealing at the same time. These are estimated ranges; the written estimate from the local pro sets the final price. Call (855) 924-3713 for a free estimate.
We Also Serve Cities Near Kensington
We connect homeowners with independent local chimney professionals across Kensington and the surrounding neighborhoods, including Flatbush, Borough Park, Midwood, and Sunset Park. The same older brick housing stock and coal-era multi-flue stacks show up across those areas, so the camera-first approach carries over. If you’re just outside Kensington, call and we’ll confirm coverage.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Kensington
No, one cap per opening is the correct approach. A shared stack with two or more flues needs a multi-flue cap sized and sealed per flue opening, not a single generic cover. If only one opening is capped, rain and animals get into the unused coal-era flue and cross-contamination between the appliances venting into that stack resumes. Call (855) 924-3713 and we’ll book a camera inspection so you can see exactly how many flues are open.
A crown with surface cracking but intact structure can take a flexible coating like Gelco; a crown cracked through the slab, or one with no overhang to shed water, needs rebuilding with a proper overhanging pour. The inspection tells you which one you have, and the photos show you why. We won’t recommend a rebuild you don’t need, and we’ll tell you if the crown can wait a season. Call (855) 924-3713 for a free estimate.
Water is almost always the cause. Kensington’s freeze-thaw cycles crack the masonry, meltwater gets into the clay tile through a failed crown or open flue, and the tile face spalls off when it freezes again. Fixing the crown and capping every opening stops the water at the source; HeatShield ceramic flue-resurfacing can restore a spalled liner wall without a full reliner in some cases. Camera inspection confirms which. Call (855) 924-3713 for a free estimate.
Yes, especially in a Kensington house from the 1900 – 1940 era. Even if you never light a fire, your furnace or water heater may vent through one of those flues, and an unlined or deteriorated clay tile flue can leak carbon monoxide into the home. The camera inspection checks what’s actually venting where. It’s a safety check, not an upsell. Call (855) 924-3713 to book one.
First-degree creosote is a light, flaky soot that a standard sweep removes. Third-degree creosote is a hardened, glazed layer baked onto the damper, smoke chamber, and flue walls that a brush won’t touch and that needs chemical treatment or mechanical removal by a specialist. Glazed creosote is a real fire hazard, which is why the camera inspection looks at the smoke chamber and not just the flue. If you’re seeing it, call (855) 924-3713 for a free estimate.
Book Chimney Cap & Crown Work in Kensington
If your Kensington chimney has a cracked crown, a rusted cap, or more than one flue opening on the stack, the fix starts with a camera inspection you can see for yourself. We connect you with a local professional who inspects first, shows the evidence per flue, and prices the work in writing before anything is recommended. The local pro is licensed and insured as their state requires. Call (855) 924-3713 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bensonhurst.